Log:
Évaluations - 0, GPA: 0 ( )

Instructions Sony, Modèle DVP-FX930

Fabricant : Sony
Taille : 12.78 mb
Nom Fichier :
Langue d'enseignement: itenesfrdenl
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


• Detach the bracket after use. If it is left attached, it could cause an accident or injury. • Do not leave the player or accessories in the car. • Do not leave the battery pack in the car. SPECIAL NOTE Any warranty, stated or implied, shall not be applied in the case of your failure to follow the instruction mentioned above, and you are liable for all problems or damage arising from failure to follow such instructions. 13GB Connecting to Other Equipment Connecting to Other Equipment b • Refer to the instructions supplied with the equipment to be connected. • Before connecting, turn off the player and the equipment to be connected, then unplug from their wall sockets. Enjoying images on a connected TV 1 Connect the player to your TV or monitor using the audio/video cord (supplied). INPUT HOLD PHONES AUDIO VIDEO DC IN 9.5V A B OPERATE OFF ON IN/ OUT IN/ OUT INPUT AUDIO VIDEO IN/ OUT IN/ OUT To AUDIO/ VIDEO input Audio/video cord (supplied) jacks of a TV or monitor z • When you play back a disc after enjoying images by “Line In” or “USB,” press INPUT repeatedly to select the disc mode. See page 7. • The player can connect to an AV amplifier in the same way as a TV. Although connecting is the same as a TV, the yellow plug of the audio/ video cord is not used Enjoying optional connections 1 Connect the player to your video player or camcorder using the audio/video cord (supplied). INPUT HOLD PHONES AUDIO VIDEO DC IN 9.5V A B OPERATE OFF ON IN/ OUT IN/ OUT INPUT AUDIO VIDEO IN/ OUT IN/ OUT To AUDIO/ VIDEO output jacks of a video player or camcorder Audio/video cord (supplied) 2 Turn on the player and press INPUT repeatedly to select “Line In.” 14GB Playback Playing Discs Playback Playing Discs Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with the disc. Connect the AC power adaptor or attach the battery pack. x X N CHARGEPOWER OPTIONSDISPLAY RETURNMENUVOL OPERATE OFF ON OPEN PUSH CLOSE CHARGE POWER 4 Insert the disc to be played. Place with the playback side down and push gently until it clicks. Playback Playback side facing down 5 Push the PUSH CLOSE on the disc lid to shut the disc lid. 6 Press N. The player starts playback. Depending on the disc, a menu may appear. Press C/X/x/c to select the item, and press ENTER. PUSH CLOSE OPEN OPERATE 1 Open the LCD panel. 2 Slide the OPERATE switch to “ON.” The player turns on and the POWER indicator lights up in green. 3 Press OPEN to open the disc lid. To stop playback Press x. To pause playback Press X. z When you play back a disc after enjoying images by “Line In” or “USB,” press INPUT repeatedly to select the disc mode. See page 7. b • Discs created on DVD recorders must be correctly finalised to play on the player. For more information about finalising, refer to the operating instructions supplied with the DVD recorder. • The disc may be still spinning when the disc lid is opened. Wait until the spinning stops before removing the disc. ,Continued 15GB Notes on the screen saver About various playback operations Notes on the screen saver About various playback operations A screen saver image appears when you leave the player in pause or stop mode without operation for more than 15 minutes. The image disappears when you press N. For the setup of “Screen Saver,” see page 22. • The player goes standby, 15 minutes after starting the screen saver function. Press N to come out of standby mode. To resume playback from the point where you stopped the disc (Resume Play) When you press N again after you stop playback, the player starts playback from the point when you pressed x. z • To play from the beginning of the disc, press x twice, and press N. • When turning power on again after power off, resume play starts automatically. b • Depending on the stop point, Resume play may not start from exactly the same point. • The resume point is cleared when: – you turn off the player (including standby mode) for DVD (VR mode). – you open the disc lid. – you press INPUT. – you disconnect the adaptor or remove the battery pack before turning off the player. To play VIDEO CDs with PBC Functions (PBC Playback) PBC (Playback Control) allows you to play VIDEO CDs interactively using a menu. When you start playing a VIDEO CD with PBC functions, the menu appears. Select an item using the number buttons on the remote, and press ENTER. Then, follow the instructions in the menu (press N when “Press SELECT.” appears). To Operation Change the LCD picture size Press OPTIONS to select “LCD Mode” (page 20). Display the DVD menu Press MENU (page 6) or TOP MENU (page 8). Check the DVD Press DISPLAY playback information (page 17). Play DVDs *1 repeatedly (Repeat Play) Press DISPLAY to select “Repeat” (page 17). Play DVDs in fast reverse or fast forward (Scan Play) Press C/c repeatedly on the player to select the speed (page 6). Switch between Press TOP MENU original and Playlist in DVD (VR mode) repeatedly (page 8). Check the CD or P...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories