Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
. • When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger. • Be sure to use the battery pack or the battery charger of the genuine Sony brand. GB x Battery life and number of images you can record/ view Battery life (min.) No. of Images Recording Approx. 110 Approx. 220 Viewing Approx. 220 Approx. 4400 Note • The number of still images that can be recorded is based on the CIPA standard, and is for shooting under the following conditions. (CIPA: Camera & Imaging Products Association) – [SteadyShot] is set to [Off]. – DISP (Screen Display Settings) is set to [Normal]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. – A fully charged battery pack (supplied) is used at an ambient temperature of 25°C (77°F). – Using Sony “Memory Stick PRO Duo” media (sold separately). GB13zUsing the camera abroad You can use the camera and the battery charger (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. Do not use an electronic transformer (travel converter). This may cause a malfunction. Inserting the battery pack/a memory card (sold separately) 1 Open the cover. 2 Insert a memory card (sold separately). With the notched corner down as illustrated, insert the memory card until it clicks into place. facing the correct direction Note the notched corner 3 Insert the battery pack. Align the battery pack with the guide arrow inside the battery insertion slot. Then, insert the battery pack until the battery eject lever locks into place. Battery eject lever GB 4 4 • Closing the cover with the battery inserted incorrectly may damage the camera. x Memory card that you can use The following memory cards are compatible with this camera: “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media, “Memory Stick Duo” media, SD memory card and SDHC memory card. MultiMediaCard GB cannot be used. In this manual, the term “Memory Stick Duo” media is used to refer to “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media and “Memory Stick Duo” media. When recording movies, it is recommended that you use the following memory cards: – (“Memory Stick PRO Duo” media) – (“Memory Stick PRO-HG Duo” media) – SD memory card or SDHC memory card (Class 2 or faster) For details on the number of images/time that can be recorded, see page 24. x To remove the memory card Access lamp Make sure that the access lamp is not lit, then push the memory card in once. Note • Never remove the memory card/battery pack when the access lamp is lit. This may cause damage to data in the memory card/internal memory. GB x x Images are stored in the camera’s internal memory (approximately 6 MB). To copy images from the internal memory to a memory card, insert a memory card in the camera, then select MENU t (Settings) t (Memory Card Tool) t [Copy]. x To remove the battery pack Slide the battery eject lever. Be sure not Battery eject lever to drop the battery pack. x Checking the remaining battery time A remaining-charge indicator appears on the LCD screen. High Low Notes • It takes about one minute until the correct remaining-charge indicator appears. • The remaining-charge indicator may not be correct under certain circumstances. • When [Power Save] is set to [Standard] or [Stamina], if you do not operate the camera for a certain period of time while the power is on, the LCD screen becomes dark, then the camera turns off automatically (Auto power-off function). • To keep clean battery pack terminal and prevent short-circuiting, place the battery pack in a plastic bag, etc. when carrying and storing to isolate it from other metal objects, etc. GB Setting the clock 1 Press the ON/OFF (Power) ON/OFF (Power) button button. The camera is turned on. • It may take time for the power to turn on and allow operation. 2 Select a setting item with v/V on the control button, then press z. Date & Time Format: Selects the date and time display format. Date & Time: Sets the date and time. GB Control button 3 Set the numeric value with v/V/b/B, then press z. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. 4 Select [OK], then press z. x Setting the date and time again Press the MENU button, then select (Settings) t (Clock Settings). GB Shooting still images 1 Set the mode switch to ON/OFF (Power) button (Still Image), then press ON/OFF (Power) button. Mode switch 2 Hold the camera steady as illustrated. • Press the T button to zoom in, W button to zoom out. 3 Press the shutter Shutter button halfway down button to focus. When the image is in focus, a beep sounds and the z AE/AF indicator lights. lock 4 Press the shutter button fully down. GB Shooting movies 1 Set the mode switch to ON/OFF (Power) button (Movie), then press ON/OFF (Power) button. Mode switch GB 2Press the shutter button f...