Powerware® Prestige Series Installation and Operator’s Manual for IBM Applications (3000 VA) Uncontrolled Copy CHAPTER 3 INSTALLATION The following sections describe UPS storage requirements and the installation and startup of the UPS. Unpacking and Inspection Carefully unpack the UPS and battery cabinets, making sure to retain the packaging materials. Examine each unit carefully for any signs of damage and immediately notify your distributor if damage is present. For assistance with the IBM 991

No part of this manual may be reproduced or transmitted in any form without written permission from AC Technology Corporation. The information and technical data in this manual are subject to change without notice. AC Technology Corporation makes no warranty of any kind with respect to this material, including, but not limited to, the implied warranties of its merchantability and fitness for a given purpose. AC Technology Corporation assumes no responsibility for any errors that may appear in th

Contact factory technical support prior to changing When P 00 = 5, sets the maximum output torque. TB- A activated; P 2 = and P 00 = 5 TB- B activated; P 22 = and P 00 = 5 TB- C activated; P 2 = and P 00 = 5 Changing these settings can adversely affect performance. Contact factory technical support prior to changing. No. Name Default Selection 0.00 {W} 4.00 ( ) Motor Stator Resistance 0.00 ( ) Motor Stator Inductance 0.0 0.0 {mH} 2000 0 {%} 400 0 {%} 400 0 {%} 400 0 {%} 400 0.00 .0 Torque Limit

Trademarks H3C, Aolynk, , IRF, H3Care, , Neocean, , TOP G, SecEngine, SecPath, COMWARE, VVG, V2G, VnG, PSPT, NetPilot, and XGbus are trademarks of Hangzhou Huawei-3Com Technology Co., Ltd. All other trademarks that may be mentioned in this manual are the property of their respective owners. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information,

Auf diese Weise dringen Stromsto.e dieser Art nicht bis zu Ihren Geraten vor. Ist das Lampchen ausgeschaltet, prufen Sie zunachst den Sicherungsautomaten der Netzleitung, um sicherzustellen, da. der Entstorer mit Strom versorgt wird. Der Sicherungsautomat des SurgeArrests ist ausgeschaltet, wenn der Knopf des Sicherungsautomaten herausgesprungen ist. Das bedeutet, der Entstorer ist uberlastet und die Stromzufuhr zu mindestens einem Gerateteil mu. unterbrochen werden. Zur Weidereinsetzung auf de

Bezpieczenstwo Przed zainstalowaniem SurgeArrest prosimy o przeczytanie wszystkich ponizszych objasnien. SurgeArrest nalezy przylaczyc do dwubiegunowego, trojprzewodowego, uziemionego gniazda zasilania. SurgeArrest jest przeznaczony tylko do uzytku wewnatrz pomieszczen. Prosimy postepowac zgodnie z podana nizej instrukcja instalacji. Instalacja SurgeArrest nalezy umiescic w pomieszczeniu chronionym, w warunkach temperatury i wilgotnosci nie przekraczajacych skrajnych wartosci wymienionych w spi

The SwitchModule is available in several media configurations and in single-slot and dual-slot models. Before you unpack the SwitchModule, read Section 3.0, "Installation Prerequisites" and Section 5.0, "Installation Precautions". WARNING: CoreBuilder 5000 SwitchModules must be installed only by trained service personnel. 2.0 Learning About SwitchModules This document provides the basic information that you need to install and configure a 3Com CoreBuilder 5000 SwitchModule at software Version v3

Serious damage may occur if the procedure is not followed properly. • This motherboard does not support CPUs with a Vcore higher than 1.6 volts. Please make sure the CPU you are using 1.6 volts or below. Check the CPU specification before you insert it in the CPU socket. • AGP cards running at 3.3v are not supported. Only AGP cards running at 1.5v (most 4x or 8x AGP cards) are supported on this motherboard. • Please make sure that your memory modules are inserted correctly. They can go in only o

All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation. 3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of 3Com Corporation to provide notification of such revision or change. 3Com Corporation provides this documentation wi

Main functions..................................8 2.2.2 Sub-functions.....................................8 2.3 The operation of the function...................8 2.3.1 Set up voltage..................................9 2.3.2 Set up current...................................10 2.3.3 Enable/disable the output....................10 2.3.4 Store parameters..............................11 2.3.5 Recall parameters.............................12 2.3.6 The function of the Menu...................12 2.3.6.1