Évaluations - 2, GPA: 4.5 ( )

Fabricant : Fellowes Taille : 200.58 kb Nom Fichier : Langue d'enseignement:

Use Powershred Lubricant #35250 or a suitable alternative with an extension nozzle. Alternatives can be 3 in 1 or Sewing Machine Oil. Oil must be non-flammable material and a non-degreaser! spray. Accelerants are combustible. See order form in this manual. Squeeze the lubricant across the full width of the cutters and then turn the machine on and run the cutting system forward for a few seconds. (Cross-cut machines with auto start: block the photo eye with a piece of paper in order to run the cutting system forward). Then, depress the reverse button and run the cutting system for a few seconds. Repeat the procedure. Safety of PS60CC, PS80, DM-C • Do not operate PS60CC, PS80, DM-C without the basket it was shipped with. • Do not attempt to defeat the safety interlock switch. • PS 80 only: Do not use without the safety flap. Injury may result. Paper Jams 1. Immediately return power switch to OFF (O) position. 2. Depress power switch to the REVERSE (R) position until the jammed paper has been fully removed from the cutter. 3. DO NOT PULL ON PAPER. Damage to the drive system could occur. All 4. If the REVERSE (R) function will not operate when pressed, the internal overload Models protection device has been activated. Release the power switch from the REVERSE (R) POSITION, wait 15 seconds and repeat. 5. In the machine jams in reverse, unplug the unit and cut all excess paper off the top and bottom of the machine before repeating the jam-clearing procedure. 6. Shred smaller quantities. See sheet capacity (Table A). Parts Identification 1. Power Jack or Power Cord 2. Power Switch 3. Housing 4. Paper Entry 5. Wastebasket 6. Indicator Lights (on select models) A B C D E F 1 24 3 5 6 4 1 2 3 5 PS60, 60CC, DM-C, DM-4, DM-6 PS70, PS75, PS80 6 Overload Protection This shredder is protected by a built-in thermal overload device that serves to protect the motor from overuse. When continuous shredding is conducted for an extended period of time, the shredder will automatically turn itself off to cool down. When shredding is automatically stopped, allow the unit to stand for about 30 minutes before using it again. Important Note This paper shredder is not intended to shred high volumes of paper. Please refer to the specifications for the recommended daily usage and sheet capacity of this shredder. Please note that if the paper is wider than the entry, and you fold it to fit, the paper thickness increases and the recommended capacity may be exceeded. A B C D E F A B C D E F Specifications: Shredding Speed = 20fpm (6m/min) Shred Size: Power Source: 120V-60Hz (N. America) PS60CC, PS80, DM-C 240V-50Hz (Australia) 5/32” x 4/5” (3.9mm x 20mm) 230V-50Hz (U.K., Europe) All others 100V-50/60HZ (Japan) 7/32” (5.8mm) strip Power Cord: 6 Feet (1.9 meters) Recommended daily use 50-75 sheets Model Entry Width Dimensions Weight PS60 PS60CC DM-C DM-4 9" (230mm) 17” x 14 3/8” x 10” (432 x 365 x 254 mm) 20 lbs. (9.1 kg) DM-6 PS70 PS75 PS80 9 1/2" (241mm) 20 3/4” x 16 1/2” x 10” (...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :