Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
2. Badly burned on soiling can be removed by boiling the filter in a little water to which 2-3 tablespoonsful of dishwasher cleaner has been added. Operating Instructions 46 Shelf Support Rails The shelf support rails on the left and right hand sides of the oven can be removed for cleaning the side walls. Removing the shelf support rails First pull the front of the rail away from the oven wall (1) and then unhitch at the back (2). Fitting the shelf support rails 3 Important! The rounded ends of the guide rails must be pointing forwards! To re-insert, first hook the rail into place at the back (1) and then insert the front and press into place (2). Operating Instructions 47 Oven Lighting 1 Warning: There is a danger of electric shock! Prior to changing the oven light bulb: – Switch off the oven! – Remove the fuses in the fuse box or switch off the circuit breaker. 3 Place a cloth on the oven floor to protect the oven light and glass cover. Changing the rear oven light/Cleaning the glass cover 1. Remove the glass cover by turning it anti-clockwise and then clean it. 2. If necessary: replace bulb with a 40 watt, 230 V, 300 °C heat-resistant, oven light bulb. 3. Refit the glass cover. Changing side oven light/Cleaning glass cover 1. Remove the left shelf support rail. 2. Remove the glass cover with the aid of a narrow, blunt implement (e.g., teaspoon) and clean it. 3. If necessary: replace bulb with a 25 watt, 230 V, 300 °C heat-resistant, oven light bulb. 4. Refit the glass cover. 5. Insert the shelf support rail. Operating Instructions 48 Cleaning the Oven Ceiling The upper heating element can be folded down to make it easier to clean the oven ceiling. Folding down the heating element 1 Warning: Only fold down the heating element when the oven is switched off and there is no risk of being burnt! 1. Remove the side shelf support rails. 2. Grip the heating element at the front and pull it forwards and out over the support lug on the inner wall of the oven. 3. The heating element will now fold down. 1 Caution: Do not use force to press the heating element down! The heating element might break. Cleaning the oven ceiling Repositioning the heating element 1. Move the heating element back up towards the oven ceiling. 2. Pull the heating element forwards against the spring pressure and guide it over the oven support lug. 3. Settle it onto the support. 4. Insert shelf support rail. 1 Important: The heating element must be positioned correctly and securely on both sides above the support lug on the inner wall of the oven (2). Operating Instructions Oven Door The oven door of your appliance may be removed for cleaning. Removing the oven door 1. Open the oven door completely. 2. Completely fold back the brasscoloured clamping lever on both door hinges. 3. Grip the oven door with both hands on the sides and close it to about 3/4 going past the point of resistance. 4. Pull the door away from the oven (Caution: heavy!). 5. Place the door, with the outer surface downwards, on a soft, flat surface, for example a blanket, to avoid scratches. Hanging the oven door 1. With both hands take hold of the sides of the door from the side on which the handle is positioned. 2. Hold the door at an angle of approx. 60°. 3. Slide the door hinges simultaneously as far as possible into the two slots on the right and left at the bottom of the oven. 4. Lift the door up until resistance is met and then open fully. 5. Lift the brass-coloured clamping levers on both door hinges back to their original position. 6. Close the oven door. Operating Instructions Oven Door Glass The oven door is fitted with three glass panels mounted one behind the other. The inner panels may be removed for cleaning. 1 Warning: Carry out the following steps only when the oven door is unhinged! When left on its hinges, the door could rise rapidly due to the lighter weight when the glass is removed and could cause injury. 1 Important: Using force, especially on the edges of the front glass panel, may break the glass. Removing the top door glass 1. Unhinge the oven door and place it on a soft, flat surface with the handle facing down. 2. Take hold of the upper glass panel at the lower edge and slide it against the spring pressure in the direction of the oven door handle until it is free at the base. 3. Raise the panel gently at the base and pull out. Removing the middle door glass 1. Grip the bottom edge of the middle glass panel and push it in the direction of the oven door handle until it is free at the base. 2. Raise the panel gently at the base and pull out. Clean the glass door panels Operating Instructions Inserting the middle door glass 1. Insert the middle glass panel at an angle from above into the section of the door in which the handle is located. 2. Lower the middle glass panel and slide it under the lower bracket towards the lower door edge as far as it will go. Inserting the upper door glass 1. Insert the upper glass panel at an angle from above into the sec...
Ce manuel est également adapté pour les modèles :Fours électriques - COMPETENCE E4100-1 (1.11 mb)
Fours électriques - COMPETENCE E4100-1 (1.11 mb)
Fours électriques - COMPETENCE E4100-1 (1.11 mb)
Fours électriques - COMPETENCE E4100-1 (1.11 mb)