Évaluations - 4, GPA: 3.8 ( )

Fabricant : Lennox Hearth Taille : 116.16 kb Nom Fichier : Langue d'enseignement:

Bend The Arch Tab 90 Degrees Into The Glass Frame U-channel Inside Top Corner View of Glass and Arch Figure 2 Glass Frame U-Channel Step 9. Position the glass door and arch assembly in front of the firebox opening with the bottom of the door held away from the fireplace. Hook the top flange of the door frame over the top of the firebox frame. Let the bottom of the door frame swing gently in towards the fireplace ensuring that the gasket seats evenly as the door frame draws shut. Fasten the two latches located underneath the firebox floor to the door’s vee-flange. Close both the latches securely. Step 10.Reinstall the modesty panel. Step 11.Reinstall the bottom compartment door. Step 12. Close the bottom radiant panel or louver assembly. Hood must be installed as shown. Top of Appliance Top Radiant Panel Top of Door Frame Figure 3 - Clean Face Hood must be installed as shown. Top of Appliance Louver Assembly Top of Door Frame Figure 4 - Louvered Face Step 13.Reinstall the top radiant panel/hood assembly, or hood and louver assembly. Make certain that the hood is installed as shown in Figure 3 (clean face models) or Figure 4 (louvered models). The fireplace must not be operated without the hood installed as shown in these figures. Note -Do not reinstall the top and bottom bustle with this arch door kit installation. Keep them for any possible future re-decorating. Part B - Merit, Merit Plus & SSDV Series Fireplaces Step 1. Slightly lift and pull the existing top radiant panel/hood assembly away from the fireplace, or pull hood and slightly lift and pull the existing louver assembly away from the fireplace. Step 2. Open the bottom compartment door (either a radiant panel or louver assembly) by pushing in simultaneously the left and right top corners of the door. (The door is hinged at the bottom.) Step 3. Open the two glass door latches located underneath the firebox. Step 4.Remove the door from the fireplace by swinging the bottom of the door outward and lifting it up and away. Step 5.Center the arch door over the glass frame as shown in Figure 1. Press the arch door onto the glass frame and bend the four corner tabs into the frame’s U-channel as shown in Figure 2. Step 6. Position the glass door and arch assembly in front of the firebox opening with the bottom of the door held away from the fireplace. Hook the top flange of the door frame over the top of the firebox frame. Let the bottom of the door frame swing gently in towards the fireplace ensuring that the gasket seats evenly as the door frame draws shut. Fasten the two latches located underneath the firebox floor to the door’s vee-flange. Close both the latches securely. Step 7. Reinstall the top radiant panel/hood assembly or hood and louver assembly. Make certain that the hood is installed as shown in Figure 3 (clean face models) or Figure 4 (louvered models). The fireplace must not be operated without the hood installed as shown in these figures. Step 8. Close the bottom radiant panel or l...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :