Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Replace logs if removed for pilot inspection. To light the burner; turn “ON” the remote wall switch and rotate the gas valve control knob counterclockwise to the “ON” position (“ON” will be at the top side of the valve). MILLIVOLT Hood Igniter Rod Thermocouple 3/8" Min(9 mm) Thermopile Pilot Nozzels Figure 19 Electronic Appliance Checkout To light the burner, turn ‘ON’ the unit mounted On/Offswitchortheoptionalremotewallswitch. Ensure the igniter lights the pilot. The pilot flame should engulf the flame rod as shown in Figure 20. ELECTRONIC Sensor Pilot Hood Igniter Figure 20 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. SUPERIOR® B-VENTGASFIREPLACES•MODELSSLBV-35,SLBV-40•INSTALLATIONINSTRUCTIONS- 17 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. SUPERIORSUPERIORB-VENT GAS FIREPLACES • MODELS SLBV-35, SLBV-40 • INSTALLATION INSTRUCTIONS SLBV-35 LOG PLACEMENT INSTRUCTIONS Left Rear Brackets Step 1 Right Rear Bracket Glowing Embers (Do not place Glowing Embers over burner slots.) Step 2 Align hole at the bottom of left front log (1) over the left front brackets and the right front log over the right front brackets. 21 Right front Brackets Left front Brackets SLBV firebox Accessories/Parts Cat. No. Model No. description H7244 — SLBV-35 Log Set Assembly 88L53 fGE Bag of Glowing Embers (Rockwool) 80L42 fdVS Bag of decorative Volcanic Stone Note: •Ceramic fiber logs are FRAGILE! Handle carefully to prevent breakage. •Install volcanic stone and glowing embers BEFORE installing logs. •To prevent sooting, make sure logs do not cover any burner openings. Left Rear Log Right Rear Log43 Left front Log 1 Right front Log 2 Step 3 1 Right front Log "Nub" 2 Position on the left rear log brackets3 Align the hole at the bottom of log (4) over the “nub” of log (2) as shown. 4 2 Step 4 Figure 23 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. SUPERIORSUPERIORB-VENT GAS FIREPLACES • MODELS SLBV-35, SLBV-40 • INSTALLATION INSTRUCTIONS SLBV-40 LOG PLACEMENT INSTRUCTIONS Left Rear Log Right Rear Log Ember Chunk Left front Log Right front Log 54 2 3 1 Step 3 4 2 Right front Log "Nub" 3 Position on the left rear log bracket Step 1 Left Rear Bracket Right Rear Bracket Right front Brackets Left front Brackets Place Ember Chunk Here Glowing Embers (Do not place Glowing Embers over burner slots.) Note: • Ceramic fiber logs are FRAGILE! Handle carefully to prevent breakage. • Install volcanic stone and glowing embers BEFORE installing logs. • To prevent sooting, make sure logs do not cover any burner openings. SLBV firebox Accessories/Parts Cat. No. Model No. description H7245 — SLBV-40 Log Set Assembly 88L53 fGE Bag of Glowing Embers (Rockwool) 80L42 fdVS Bag of decorative Volcanic Stone Step 2 Align hole at the bottom of left front log (2) over the left front brackets and the right front log over the right front brackets. 32 1 Align the hole at the bottom of log (5) over the "Nub" of log (3) as shown. 3 5 Step 4 Figure 24 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE...
Ce manuel est également adapté pour les modèles :Cheminées - SLBV-35NE (2.89 mb)
Cheminées - SLBV-35NE (2.89 mb)
Cheminées - SLBV-35NE (2.89 mb)
Cheminées - SLBV-35NE (2.89 mb)