OAfter completion of CCRS recording , be sure to cancel the CCRS and ensure that the CCRS indicator has gone off. NotesNotes 1. If the CCRS key is pressed during CD playback, playback stops and CCRS operation begins. 2 .If the remaining amount of tape is small, CCRS may not function correctly or CCRS operation may be canceled in mid-operation. 3 .Once the CCRS recording level has been set, the recording balance and recording level cannot be adjusted while the CCRS operation is being carried out.

O In case of recording a FM broadcast,refer to discription of "How to use the MPX FILTER key". & O While pressing the PAUSE (8) key, press the REC/ARM (¦) key. 0dB. Recording level display. 1Make “Playback (recording) preparation”. 0 2(Load a disc in the CD player) Normal recording 1Select the source to be recorded. 3 2Perform auto-bias adjustment. (The bias adjustment is applied to deck B.) OThe optimum bias is set in about 50 seconds, after which the deck enters the stop mode. OFor a fine adju

2Select the Dolby NR mode. 237 To Stop relay playback OBe sure to remove tape slack before insertion. OBe sure to close the cassette holder securely by pushing it. Each press switches the indication. 1 “[” : Relay playback of two sides of tapes in decks A and B is repeated. 2 “O” : Relay playback is not available with this setting. 3 “O” : Relay playback of only one side of tapes in decks A and B is repeated. Each press switches the indication. 1 DOLBY NR “OFF” (extinguished): Dolby NR is not us

только АС 120 В Китай........................................................ только АС 220 В Австралия................................................. только АС 240 В Великобритания и Европа.........................только АС 230 В * Прочие страны .....переключаемое АС 110-120/220-240 В Для Великобритании * Селектор напряжения питания Являясь партнером Energy Star, корпорация Kenwood определила, что данный прибор соответствует требования Energy Star по эффективности энергии. Данный прибор

Tape dubbing operation (Deck A \Deck B) CT-2050/203/KXF-W6010/W4010 (En/M) The dubbing refers to the copy of the recorded contents of a tape to another tape (tape in Deck A \tape in Deck B). Since this unit is not designed for recording with metal (TYPE ) tapes, do not use metal tapes for recording. CT-203/KXF-W4010 only CT-2050/KXF-W6010 only Preparation 1Load the tape to be played in deck A and the tape to be recorded in deck B. 02Set the tape transport directions of decks A and B to the same

AC voltage selector switch Fig. 1 Before plugging in this unit, make sure that the position of the AC Voltage Selector conforms to your line (mains) voltage. If not, it must be reset. See Fig. 1. WARNING NOTICE: IN MOST CASES IT IS AN INFRINGEMENT OF COPYRIGHT TO MAKE COPIES OF TAPES OR DISCS WITHOUT THE PERMISSION OF THE COPYRIGHT OWNERS. ANYONE WISHING TO COpy COMMERCIALLY AVAILABLE TAPES OR DISCS SHOULD CONTACT THE MECHANICAL COPYRIGHT PROTECTION SOCIETY LIMITED OR THE PERFORMING RIGHTS SOCIE

Особенно следите за детьми, так как они являются основной причиной попадания таких предметов внутрь аппарата. 9. Корпус - Никогда не открывайте корпус сами. Все узлы внутри аппарата находятся под опасным напряжением. 10.Магнитное поле - Устанавливайте данный аппарат вдали от телевизора, радио, акустических систем, электрических игрушек и других приборов, которые могут вызвать образование магнитного поля . 11.Чистка - Перед чисткой необходимо вынуть шнур из розетки. Не применяйте для чистки к

. You can also check with the n. and a. peak level indicators. Each press of the MODE key changes the setting. 1 “LEVEL” lights up: Recording level setting mode 2 “BAL.” lights up: Recording balance setting mode 3 “BIAS” lights up: Recording bias setting mode (Deck B of the CT-2050/KXF-W6010 only) 4 “LEVEL”,“BAL.”,and “BIAS”go off: Counter display mode lights up 0dB. Recording level display. OAdjust the recording level so that the 0 dB of the peak level indicators sometimes lights up. OThe recor

Space (non-recorded). Tune being played. To play a tune located immediately after the tune being played To play the tune being played from the beginning To play a tune located 4 tunes beyond Press 4 times during the playback. Press once during the playback. Press 5 times during the playback. DPSS will not function properly with the following types of tapes. O Tapes containing spaces of 4 seconds or more, such as conversations and speeches. O Tape containing extremely low levels or non-recorded s

6. Temperature -The appliance may not function properly if used at extremely low, or freezing temperatures. The ideal ambient temperature is above +5Ae (41UV). 7. Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 8. Electric shock -Care should be taken so that objects do not fall and liquid is not spilled into the enclosure through openings. If a metal object, such as a hair pin o