Évaluations - , GPA: ( )

Instructions Philips, Modèle 21000050

Fabricant : Philips
Taille : 938.5 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Compatibility To be used with coffee machines type SUP 032OR, SUP 032NR, SUP 032BR, SUP 032AR PLEASE NOTE: The Milk Island must be connected to a Saeco Talea coffee machine using the special connector. The Milk Island is not equipped with a connector suitable for connection to a conventional plug. Subject to engineering and manufacturing changes due to technological developments. This appliance conforms to European Directive 89/336/EEC (Italian Legislative Decree 476 dated 04/12/92) concerning electromagnetic compatibility. 14 14 INSTALLATION INSTALLING THE MILK ISLAND Warning: Before installing the Milk Island, remove the water tank, drip tray, dregs drawer and empty the coffee bean hopper of the espresso machine. To connect the Milk Island, turn OFF the coffee machine, and remove the water tank, drip tray, and coffee grounds drawer. Unplug the power cord from the socket. Place the machine on its side. 1 2 3 Remove the Milk Island from After removing the water tank and Remove the cover and keep it the packaging. Make sure that drip tray from the machine, gently turn in a safe place. the carafe is intact. the machine onto its right side, so the left side is up. Remove the protection cover. Using a coin, unlock the cover by turning it as shown in the figure. 4 Push the release button in the direction indicated. 5 Hold the release button and connect the Milk Island to the coffee machine by inserting both connectors into the base of the coffee machine. 6 Release the button when the base has been completely inserted. Ensure that the base is firmly connected to the machine. 7 Once the support base has been inserted properly, re-position the coffee machine to its upright position and replace all components that were previously removed. Milk Island is automatically configured when the coffee machine is turned on. 8 9 Position the carafe onto the base by slightly rotating. Check the LED on the base, if the light is green the Milk Island is operating correctly. OPERATION 15 OPERATING THE MILK ISLAND Warning: Before using the Milk Island, clean the carafe and all components. Ensure that all the components have been installed properly. The glass of the carafe can reach very high temperatures: danger of scalding! Only use the Milk Island with milk or water. DO NOT USE any other liquid (other than milk or water) or chemical compound in the Milk Island. Important note: The milk in the carafe should never be below the “MIN” minimum level nor exceed the “MAX” maximum level. After using the Milk Island thoroughly clean all the components. To guarantee better results when preparing cappuccino, we recommend using cold (0-8°C / 3246° F), partially skimmed milk. 312 Fill the milk carafe with the quantity Press and turn so as to position Turn the knob until it is in the of milk desired (between the min and max level). the carafe onto the base of the Milk Island. Check that the light on position. the base is green. 4 Wait for the milk to be frothed and the desired density is reached. 7 5 Turn the knob until it is in the rest position ( ). 8 6 Once the milk is done frothing remove milk carafe using the handle. Be sure to grip the plastic handle as the carafe will be hot. To make a cappuccino, gently Position the cup with the frothed milk Note: when the milk carafe is swirl the carafe and pour the milk under the dispensing head. Then not being used, place the sugar into a cup. brew coffee into the cup. (see coffee container on the base. machine operating instructions). 16 16 CLEANING CLEANING THE MILK ISLAND Warning: Do not immerse the Milk Island base in any liquid. Maintenance and cleaning operations of the base can only be carried out when the machine is cold and disconnected from the power supply. All components described in this section may be washed in a dishwasher for home use. Do not use sharp objects or harsh chemical products (solvents) for cleaning. Use a soft dry cloth to wipe the base. Do not dry the machine and/or its components using a microwave and/or conventional oven. 132 Remove the carafe from the base. Remove the emulsifying group Remove the valve from the Remove the handle holding the from the carafe. emulsifying group. carafe by the spout. 4 Remove the suction tube from the emulsifying group. 5 Wash the carafe with hot water and mild dish soap. 6 Wash the emulsifying group with hot water and mild dish soap. 7 Carefully clean the valve with water. 8 Check if the valve is correctly cleaned by slightly squeezing it on the sides. It is advised to use a clean and properly dried valve. 9 Wash the tube with hot water. 17 17 101112 Re-assemble all the covered Assemble the handle. Keep the upper part angled onto components. Replace the Place the upper part onto the the carafe, and slide the lower emulsifying group onto the carafe. carafe, as shown in the figure. part of the handle underneath the Warning: make sure that the carafe. cover is correctly inserted in the tube located inside the carafe. 13 At this point, firm...