Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Ordinateurs - HP xw8200 Workstation (1.46 mb)
Ordinateurs - HP xw8200 Workstation (460.6 kb)
Ordinateurs - HP xw8200 Workstation (1.13 mb)
Facilité d'utilisation
SATA device configuration guidelines
HP xw8x00 and xw9x00 Workstations
This document describes how to configure SATA devices in HP xw8x00 and xw9x00 Workstations.
NOTE: SATA ports on the workstation are not hot swappable.
1.
Begin connecting the SATA mass storage device cables to the workstation SATA ports, typically
starting with SATA port 0. The port 0 connector is identified by a unique color.
NOTE: Refer to the service label on the inside of the workstation access panel for SATA and SAS
port details.
Figure 1 SATA ports
Example: HP xw8400 Workstation SATA ports Example: HP xw9400 Workstation SATA ports
2.
Continue connecting the mass storage devices to unused SATA ports.
TIP: Connect the hard drives first. When all hard drives are connected, begin connecting the
optical devices.
NOTE: All internal bay SATA hard drives are supported only on the system board SATA ports.
An external SATA hard drive is supported on either an eSATA or a SAS controller card port.
August 2009, 459722-002 HP xw8x00 and xw9x00 Workstations
1
... Ce manuel est également adapté pour les modèles :
Ordinateurs - HP Workstation xw8000 (209.76 kb)