Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Ordinateurs - HP Integrity NonStop H-Series (16.73 mb)
Ordinateurs - HP Integrity NonStop H-Series (957.56 kb)
Ordinateurs - HP Integrity NonStop H-Series (881.66 kb)
Ordinateurs - HP Integrity NonStop H-Series (965.62 kb)
Ordinateurs - HP Integrity NonStop H-Series (676.93 kb)
Ordinateurs - HP Integrity NonStop H-Series (393.72 kb)
Ordinateurs - HP Integrity NonStop H-Series (776.57 kb)
Facilité d'utilisation
x6530 Run Command and Customizing Options
Automatically Starting mwm
Automatically Starting
You can automatically start mwm by using:
mwm
The workstation’s X server, if the X server can start a client.
xdm, a standard X client.
A Telnet X client.
Using an X Server to Start
X servers that start clients include servers that run on DOS PCs and Macintosh
mwm
computers. Some X servers offer this feature only at the beginning of an X session,
while others offer it continually throughout the X session.
PC-Xview is an X server from Graphic Software Systems, Inc., that operates under
DOS. A configuration file, created when installing PC-Xview, would contain
information to designate mwm as the first client to start and the name of the UNIX
workstation to run it from. When PC-Xview is started, the user is prompted for his or
her password on the UNIX workstation, then mwm is started immediately after the X
server comes up at the workstation.
X servers from Apple Computer, Inc., and White Pine Software, Inc., can start clients.
For these X servers, an X client is started by selecting commands from a pull-down
clients menu. The user adds commands to the clients menu through a dialog box. X
clients can be added or modified at any time while the X server is running. In this
case, the user could start mwm from the pull-down menu, then start x6530 from
mwm’s menu, or set up the clients menu to have separate commands for mwm and
x6530.
Using a Telnet X Client to
The major X terminal vendors have Telnet X clients built into the setup screens for the
Start mwm
X server. The user switches back and forth between the X server and set-up modes
with a single keystroke. The user uses Telnet in setup mode to access the UNIX
workstation to start mwm, then switches back to server mode to start x6530 from
mwm’s menu. The disadvantage of this method is that more UNIX experience is
required of the user, such as knowing the UNIX commands to log on, change
directories, run processes, stop processes, obtain directory listings, and so on. Some
knowledge of Telnet is also required.
Using xdm to Start mwm
xdm is a good choice to start mwm if you do not have X servers that start clients. xdm
is a standard X client included with X that automatically starts one or more clients for
a workstation from your instructions. After xdm is started, it runs continuously,
polling each workstation to determine if it should start an X session and the defined
clients, such as mwm, for that workstation.
A user never has to think about starting an X server and mwm with xdm. All a user
sees is a login window for the UNIX workstation whenever he or she turns on the
workstation. After the user logs in to UNIX, mwm is started for the user’s
workstation; then x6530 can be run from mwm’s menu. See the X Window System
User’s Guide for complete information on setting up and running xdm.
082628 Tandem Computers Incorporated
2–33
... Ce manuel est également adapté pour les modèles :
Ordinateurs - HP Integrity NonStop J-Series (79.49 kb)
Ordinateurs - HP NonStop G-Series (79.49 kb)
Ordinateurs - HP NonStop L-Series (79.49 kb)