Évaluations - , GPA:
(
)
)
Fabricant : HP
Taille : 495.94 kb
Nom Fichier :
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Interconnect bay numbering and device
HP ProLiant WS460c Gen8
Overview
mapping
•
HP BladeSystem c7000 Enclosure
Workstation Blade with
These instructions provide an overview of the HP ProLiant WS460c
Gen8 Workstation Blade with WS460c Graphics Expansion Blade
WS460c Graphics Expansion
instal ation process. For software instal ation information, see the
Microsoft Windows on HP ProLiant WS460c Gen8 Workstation Blade
Blade
with WS460c Graphics Expansion Blade Administrator Guide.
Installation Instructions
Installing a workstation blade
1. Instal and configure an HP BladeSystem c-Class enclosure.
2. Install any workstation blade options.
3. Instal interconnect modules in the enclosure.
4. Connect the interconnect modules to the network.
5. Install a workstation blade.
6. Complete the workstation blade configuration.
For definitions of the acronyms used in this document, refer to
"Acronyms and abbreviations" in the workstation blade user guide.
To support network connections for specific signals, instal an
interconnect module in the bay corresponding to the FlexibleLOM or
Installing an HP BladeSystem
mezzanine signals.
c-Class enclosure
Server blade signal Interconnect bay Interconnect bay labels
FlexibleLOM
1 and 2
Before performing any workstation blade-specific procedures, instal
Mezzanine 1
3 and 4
an HP BladeSystem c-Class enclosure.
Mezzanine 2
5 and 6
The most current documentation for workstation blades and other
HP BladeSystem components is available at the HP website
7 and 8
(http://www.hp.com/go/bladesystem/documentation).
For detailed port mapping information, see the HP BladeSystem
Documentation is also available in the following locations:
enclosure instal ation poster or the HP BladeSystem enclosure setup
•
Documentation CD that ships with the enclosure
and installation guide on the HP website
(http://www.hp.com/go/bladesystem/documentation).
•
HP website (http://www.hp.com/go/hpsc)
Installing workstation blade options
Before installing the workstation blade, install any workstation blade
options, such as an additional processor, drive, and so on. For
workstation blade options instal ation information, see the
administrator's guide for your operating system.
Installing interconnect modules
For specific steps to instal interconnect modules, see the
documentation that ships with the interconnect module.
© Copyright 2012, 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shal not be liable for
technical or editorial errors or omissions contained herein.
Microsoft® and Windows® are U.S. registered trademarks of Microsoft
Corporation.
Part Number: 703965-002
February 2013
Edition: 2
...