Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Ordinateurs - HP VPN Server Appliance sa3400 (108.77 kb)
Ordinateurs - HP VPN Server Appliance sa3400 (271.26 kb)
Facilité d'utilisation
HP sa3400/sa3450.qxp 2/28/01 10:06 AM Page 3
Performing the Initial Hardware Setup
Connecting the Device to the Network
4
5
1
To connect the VPN device to the network:
Connect the supplied DB-9 console cable to the console port of the VPN device
and to the COM port on your PC. Make a note of the communication port
1 Turn the device off before connecting network cables.
number on your PC.
2
2
Connect the supplied Ethernet cables to the Ethernet interfaces.
Plug in the power cable appropriate for use in your country.
To COM Port
3 Turn on the VPN device by setting the power switch to the 1(one)
3 Connect your Ethernet LAN cables to the shielded cables.
position.
4 Turn the device on.
4 Configure and run your terminal emulation program (such as HyperTerminal*),
to create an active console session, using the following settings:
• 96
• No parity
• No hardware flow control
• 8 bits
• 1 stop bit
5 In the console window, select Transfer, then Capture Text.
6 In the File menu, select Save.
7 In the Save in and File name fields, select the folder and file name
under which you want to store your session file.
8 Click Save.
9 Press Enter three times. Licensing text appears with a prompt. Press
AC Power Cord
(to top)
the space bar or press Enter to scroll through the license agreement.
To accept the license agreement terms, press Y.
AC Power Cord
Console Port
A name-and-state prompt appears: hostname:SAFE>
10 Wait 60 seconds as the device changes from safe mode to normal
Bridge Mode On (Y/N) [n]:
mode.
Enter int E0 IP Address [0.0.0.0]:
11 At the name-and-state prompt, enter enable.
Enter int E0 IP Subnet Mask [255.0.0.0]:
12
Enter int E1 IP Address [0.0.0.0]:
At the name-and-state prompt, enter admin.
Enter int E1 IP Subnet Mask [255.0.0.0]:
13 At the name-and-state prompt, enter setup.
Enter Default Gateway [0.0.0.0 | interface no]:
The system prompts you for the host name.
Enter Manager Password [password]:
14 Enter a name up to eight characters long. For example, vpn1.
Enter time zone [GMT]:
Shielded Ethernet Cables
Enter year [2000]:
The system displays a series of prompts and, in square brackets,
Enter month [9]:
examples of responses.
10/100 Ethernet
Enter day [1]:
15 Respond to the prompts (shown at right) by entering the
Enter hour [16]:
appropriate information and pressing Enter.
Enter minute [28]:
Note: When the system prompts you to enter the time zone, enter
Once you have connected your VPN device to the network behind your
Enter second [1]:
the time zone with respect to Greenwich Mean Time. For example,
Do you wish to save configuration to flash? [y]:
firewall, configure the device using Hewlett-Packard SA3000 Series VPN
to set the time zone for Boston, enter timezone est 5 edt.
Manager included on the CD-ROM. Follow the instructions in the
This completes the initial hardware setup. Remove the console cable from the VPN device.
Installation Guide for installing the VPN Manager.
... Ce manuel est également adapté pour les modèles :
Ordinateurs - HP VPN Server Appliance sa3450 (335.67 kb)