Évaluations - 1, GPA: 3 ( )

Fabricant : Bryant Taille : 375.05 kb Nom Fichier : Langue d'enseignement:

14 DSB-122L/122LH(.... ) 01.8.17 5:28 PM ...1.. 5 TO SET UNIT TO SLEEP MODE When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then increase that temperature throughout the night. 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display. 2. Press the MODE button to select the desired mode. Then, set the desired temperature using the TEMP. ^or Ў buttons. 3. Press the SLEEP button on the remote controller. The unit will then be in the sleep mode and will cool the room to the desired temperature. After a while the unit will increase the temperature again. This process will then repeat. TO CANCEL SLEEP MODE: To cancel sleep mode, press the SLEEP button again; the SLEEP indicator will disappear in the display. AUTO TO SET TURBO/MILD MODE 1. The unit is fixed “MILD” mode on production. 2. Press the “TURBO/MILD” button for powerful cooling. 3. When press the “TURBO/MILD” button one more time, it will be back to “MILD” mode. EMERGENCY OPERATION If the remote control is lost, broken or has no batteries, follow the procedures below: 1. Open the indoor unit’s cover and make sure the 2. The unit will then turn on and depending on the room EMERGENCY/REMOTE switch is set to the EMER-temperature, it will select the cool or dehumidifier, fan GENCY position. speed and fan direction automatically. EMERGENCY/REMOTE Switch 3. To turn the unit off, slide the EMERGENCY/ REMOTE switch to the REMOTE position. EMERGENCY/REMOTE Switch 15 DSB-122L/122LH(.... ) 01.8.17 5:28 PM ...1.. 6 CHANGING/CLEANING THE AIR FILTERS To change or clean the two black air filters, follow the procedures below: 1. Open the indoor unit’s cover and remove both black air filters by bending them slightly backward and the lifting out. 3. Examine the filters and determine if they need to be cleaned or replaced. To clean filters, use a vacuum and clean off dust. Use water and mild soap also if necessary. 2. Remove the two small filters (Deodorizing and Electrostatic) from the indoor unit. 5. Insert cleaned or new black filters back into the unit. 4. Insert cleaned or new small filters (Deodorizing and Electrostatic) back into the unit. NOTES: • The filters should be changed every 6 months. If in a climate with cold winters, once a year is adequate. • After getting rid of vinyl in the filter (Deodorizing and Electrostatic), use it. CLEANING THE INDOOR COVER To clean the indoor cover, follow the procedures below: 1. Remove the left and right side to open the indoor cover upward by two hands. NOTE: Please remove and insert the indoor cover by two hands. 2. Pushing forward the indoor cover. 3. Remove the indoor cover. 3. (Remove it when cleaning.) 4. Cleaning the indoor cover. NOTES: • Wipe the indoor cover with soft sponge or soft cloth. • When cleaning up it in the state of opening the indoor cover, wipe i...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :