Évaluations - 1, GPA: 5 ( )

Fabricant : Amana Taille : 375.05 kb Nom Fichier : Langue d'enseignement:

FAN DIR. Button Press to select up/down direction for fan. TURBO/MILD Press to be colder the unit. COVER Slide down to access most of the remote buttons. Slide down further to access the battery compartment. FAN Indicators FAN DIRECTION Indicators Lights to indicate Lights to indicate the the fan speed. fan direction. NATURAL Indicator Lights to indicate the speeds simulating a breeze. MODE Indicators (Auto/Quick/Cool/Fan/Dehumidifier/Heat) Lights to indicate the mode selected. AUTO TIMER Indicators (Include sleep) Lights to indicate the timer function mode. TEMPERATURE & RESERVATION TIME lndicat Lights to indicate the temperature or time. 8 DSB-122L/122LH(.... ) 01.8.17 5:27 PM ...9.. OPERATION CONNECTING THE AC CORD The outdoor unit is connected to the indoor unit through the AC connecting wire or connection cord. To connect the indoor unit to AC, follow the procedures below: 1. Insert the attached AC plug AC Outlet into a pronged and Plug 220V AC outlet. Plug into 220V AC Outlet. NOTES: • Never connect the AC line cord plug to other than the specified voltage (220V). • Use the attached power cord only. • The new air conditioner system should be on it’s own 220V circuit. Contact your local electrical installer for installation. HOW TO STORE THE REMOTE CONTROLLER To store the remote controller, follow the procedures below: 1. Remove the left and right side to open the indoor cover upward. • Please remove and insert • the indoor cover by two hands. 2. Store the remote controller. (Remove it when using) ON OFF ENTERCANCEL TIMER RESET FANDIR. FANSPEED MODE SLEEP ON/OFF TEMP. 3. Press the left and right side to close the indoor cover. SETTING THE UNIT FOR REMOTE OPERATION After the unit is fully connected and plugged in, it can be turned on. To turn the unit on and set it for remote operation, follow the procedures below: 1. Open the indoor unit’s cover and make sure the EMERGENCY/REMOTE switch is set to the REMOTE position; this will allow the unit to operate with the remote controller. EMERGENCY/REMOTE Switch 2. Press the ON/OFF button on the remote controller to turn on the unit. The On LED will light on the indoor unit and “ON” will light in the remote display. To select the various modes and settings, read the following pages. EMERGENCY REMOTE THREE MINUTE COMPRESSOR DELAY • After turning the indoor unit on and setting it for air conditioner operation, the compressor (outdoor unit) will not come on for three minutes. This is a feature that will protect the compressor from damage due to quick start and stops. 9 DSB-122L/122LH(.... ) 01.8.17 5:27 PM ...1.. 0 HOW TO INSTALL BATTERIES To install the batteries, follow the procedures below: 1. Slide down the cover to access most of the remote buttons. Slide down further to access the battery compartment. 2. Insert two “AAA” size Alkaline batteries following the polarity diagram below. ON/OFF TIMER ENTER/ CANCEL TURBO/MILD +– +– BATTERY ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :