2. Bolt (bolts not included) the unit directly to the workbench through the two 1/4” holes on the Base (17).The workbench must have a solid surface capable of supporting the weight of this product, the workpiece and assorted tools. See FIGURE 2. Base (17) FIGURE 2 FIGURE 1 1/4” Hole with BoltLock Wheel (18) SKU 40208 For technical questions, please call 1-800-444-3353. Page 4 Warning! Always unplug the unit before changing grinding wheels, or when making any adjustments to the Sharpener. Warning

In addition, the following parts should be cleaned in a dish washer: Food Pusher (3), Blade Assembly (15), and Food Tray (2). After assembling the unit (see directions below), test the Food Slicer by running several slices of day-old bread through the Food Slicer to insure that all parts are working properly. Clean the Food Slicer after every use. Failure to follow all cleaning instructions and warnings may result in serious illness due to food poisoning. Your Food Slicer will require assembly p

Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. 13. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools. 14.

PERSONAL SAFETY 1. Stay alert. Watch what you are doing, and use common sense when operating kitchen appliances. Do not use kitchen appliances while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating kitchen appliances may result in serious personal injury. 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught i

Copyright© 2005, 2009 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts,

Save this manual. Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacemen

For Household Use Only. 9. Do not let cord hang over edge of table or counter. 10. Do not let cord contact hot surface, including stove. 11. Do not use fingers to scrape food away from discharge disc while appliance is operating. Cut type injury may result. SAVE THESE INSTRUCTIONS. SAFETY SETUP OPERATION MAINTENANCE Work Area Safety 1. Do not use outdoors. 2. Do not place on or near a hot gas or electric burner, or in a heated oven. 3. Extreme caution must be used when moving appliance. 4. Keep

2. Dry with a soft cloth. Wipe the motor/heating element housing with a soft clean cloth or sponge. 3. Allow unit to dry completely before assembly or use. 4. After washing and drying, apply a small amount of salad oil (not included) to Cutting Plates to keep them lubricated. CAUTION: Do not clean with bleach, thinners or benzine. These will damage or discolor Meat Grinder. Assembly Read the ENTIRE IMPORTANT SAFEGUARDS section at the beginning of this manual including all text under subheadings