Log:
Trier : Nom ↑   Téléchargements   Évaluation   Taille ↑  
Téléchargements : 0   Taille : 2 mb   Fabricant : Jet Tools  
Catégorie : Casseroles
@name

If the blade is not 0° to the miter table: Figure 9 3. Using a 5mm hex wrench, loosen four adjustment bolts (B, Fig. 9) at the back of the miter saw. Unlock the bevel lock handle (A, Fig. 8) and position the cutting arm to be zero degrees to the table using the combination square as your reference. 4. Tighten the bevel lock handle (A, Fig. 8) and the four adjustment bolts (B, Fig. 9). Bevel Scale Indicators 1. Set the blade to be exactly 90°(0°) to the table. 2. With cross-point screwdriver, loo





catégories