Log:
Trier : Nom ↑   Téléchargements   Évaluation   Taille ↑  
Téléchargements : 0   Taille : 62 kb   Fabricant : GE  
Catégorie : Jig Saw et
@name

the duct covers conceal the ductwork running from the top of the hood to the ceiling or soffit. Before you begin, you should determine the installation height of the hood and order the correct size duct cover. Optional 6" or 12" ZX6DC30YSS–6" high decorative duct cover Duct Cover ZX12DC30YSS–12" high decorative duct cover Dimensions and Clearances: These vent hoods must be installed 30" min. and 36" max. above the cooking surface. Installation will be easier if the vent hood is installed before

Téléchargements : 0   Taille : 85 kb   Fabricant : GE  
Catégorie : Jig Saw et
@name

• In 25" deep cabinets, the cooktop will be flush with the front of the countertop • The stainless surface of the cooktop will be 1/2" higher than adjacent countertop. Accessory Requirements: All models require the installation of a backguard. A backguard should be ordered at the same time as the cooktop. Both should be on site before cabinetry has been installed. Order one backguard: ZXC1B36YSS–1-1/2" high backguard (required for island installations) ZXC12B36YSS–12" high backguard ZXC22B36YSS–

Téléchargements : 0   Taille : 85 kb   Fabricant : GE  
Catégorie : Jig Saw et
@name

Liquid Propane Gas Model Also Available: ZGU36L4RYSS–4 gas burners and grill. Installation Options: This cooktop can be installed in standard 24" or deeper 25" cabinets. • In 24" deep cabinets, the front of the cooktop will project approximately 1-7/8" beyond the front of the countertop. • In 25" deep cabinets, the cooktop will be flush with the front of the countertop • The stainless surface of the cooktop will be 1/2" higher than adjacent countertop. Accessory Requirements: All models require





catégories