c-................................. amperes herts kilograms hours minutes seconds alternating current direct current no load speed alternating or direct current Class II Construction splash-proof construction watertight construction revolutions or reciprocation per minute number of blow IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE 1. SAVE THESE INSTRUCTIONS - This manual Length of Cord (Feet) 25 50 100 150 AWG Size of Cord 18 18 18 16 ADDITIONAL SAFETY RULES FOR CHARGER & BATTER

5046DB 160 mm (6-1/4") MODEL 5046DWA, S046DWB With High Capacity Battery Charger INSTRUCTION MANUAL SPECIF1CAWONS 1 1 I I MODE7 Blade diameter Cutting depth No I ~ ~ ~ Overall length ~ ~ e d Net weight 5026D I 165 mm 16.112") I 55 mm 12-3/16")I 2,400 I 338 mm 113-5116',)I 3.8kg (8.4Ibs) 5036D I 160mm 16-114")1 53 mm (2-1/16"]I 2,400 I 338mm (13-5116")I 3.8kg 18.4Ibs) Battery Cartridge 1822 Model DC1801 High Capacity Battery Charger Voltage Input output Charging time 18 V A.C. only 50 -60 Hr O.C.

Turning off controls will not reduce this risk. ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power receptacle. 3.Do not allow anything to cover or clog the charger vents. 4.Always cover the battery terminals with the battery cover when the battery cartridge is not used. 5. A battery short can cause a large current flo

When cutting operation requires the resting of the saw on the workpiece, the saw shall be rested on the larger portion and the smaller piece cut off. I To avoid kickback do support board Don't support board or panel away or panel near the cut. from the cut. I Fig. Fig. 2 5 Do not use dull or damaged blade. Unsharpened or improperly set blades produce narrow kerf causing excessive friction, blade binding and KICKBACK. Blade depth and bevel adjusting locking levers must be tight and secure before

Unsharpened or improperly set wheels produce narrow kerf causing excessive friction, wheel binding and KICKBACK. Wheel depth and bevel adjusting locking levers must be tight and secure before making cut. If wheel adjustment shifts while cutting, it will cause binding and KICKBACK. Use extra caution when making a “Pocket Cut” into existing walls or other blind areas. The protruding wheel may cut objects that can cause KICKBACK. 11. Use only diamond wheels. NEVER use tool with wood cutting blades

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Model 5620D Blade diameter 165 mm (6-1/2”) Max. Cutting depth at 90° 54 mm (2-1/8”) at 45° 38 mm (1-1/2”) No load speed (RPM) 2,600/min. Overall length 364 mm (14-5/16”) Net weight 3.4 kg (7.5 lbs) Rated voltage D.C. 18V Standard battery cartridges 1822, 1833 • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA003-1 (FOR All BATTERY OPER

Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Let a hot battery cartridge cool down before charging it. 4. Charge the Nickel Metal Hydride battery cartridge when y

(2)Avoid storing battery cartridge ina container with other metal objects such as nails, coins, etc. (3)Do not expose battery cartridge to water or rain. 6. Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF). 7. Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. SAVE THESE INSTRUCTIONS. Installing or removing the saw blade CAUTION: Always be s