Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Bow Features of Your Nautique The open bow section of your boat has removable cushions. The center section may be equipped with an optional cushion which can be removed and stored in the trunk or under the observer’s seat. The cushion on the starboard side of the bow section can be removed to access the insulated cooler. Storage can be accessed by removing the other cushions. 4-36 Controls and Indicators Driver’s Seat Adjustment The driver’s seat can be adjusted fore and aft and rotates side-to side. To slide seat, turn the handle (A) counterclockwise about one full turn, slide into position, and tighten the handle hand-tight to secure in locked position. To rotate seat, pull up on the lever (B) at the front of the seat and push to the side. Release lever to lock the seat in position. CORC164 BA seat or seats which are not locked in position can cause death or serious injury. Lock the seat(s) in position (fore and aft) before operating theboat. ! A 4-37 Section 4 Rearview Mirror Adjustment The rearview mirror can be positioned on the windshield to observe a skier and traffic behind you. The mirror should be lowered when trailering or when using a mooring cover. To reposition, loosen the thumbscrews (A), reposition and tighten thumb screws. Use the mirror friction nut (B) to increase the friction of the mirror adjustment. If the mirror moves out of adjustment, increase the friction by turning the friction nut clockwise. B A CORC165 4-38 Controls and Indicators Observer’s Seat (216V Only) Lift up on the bottom of the observer’s seat cushion to access storage under the bow area. You can leave the seat in the “UP” position to help dry the carpet. Storage Hatch To open the storage hatch, lift the latch and turn counterclockwise. The gas shock will help raise the hatch. To close and latch the hatch, pull down on the hatch and allow the hatch to close firmly. Make sure there are no hands, fingers or any other obstructions in the way of the hatch when you close it. To close the latch, turn the latch clockwise and fold the red dot down. The storage hatch latch features a lock. Use the key to lock and unlock the latch. The key only requires about a 10° turn to lock and unlock. Two dividers are installed in the engine compartments, which can be removed for service. The dividers must be in place when the boat is in use. CORC146 4-39 Section 4 Engine Cover Hatch To open the engine cover hatch, lift the latch and turn counterclockwise. The gas shock will help raise the hatch. To close and latch the hatch, pull down on the hatch and allow the hatch to close firmly. Make sure there are no hands, fingers or any other obstructions in the way of the hatch when you close it. To close the latch, turn the latch clockwise and fold the red dot down. The engine cover hatch latch features a lock. Use the key to lock and unlock the latch. The key only requires about a 10° turn to lock and unlock. COR036 An engine guard which is not in place orcontact with any moving parts can cause death orserious injury. The engine box cover is a machineryguard. DO NOT operate your boat without the coverclosed and in place unless you are performing a checkor maintenance. Keep your hands, clothing, hair andany other body parts away from any moving parts. ! 4-40 Controls and Indicators Walk-Thru Windshield Opening/Latching There are two latches on the inside starboard side of the walk-thru windshield. Rotate both of the window locks (A) to secure or unlock the window. Always have window closed and secured when trailering the boat. CORC039A A A An open window can cause death orserious injury. Make sure both window locks are securewhen vessel is in motion. ! Coolers The floor coolers can be used to store miscellaneous items or drinks. There is a drain installed in the coolers. DO NOT depend on the coolers to keep valuables or electronics dry. Keep these items in a specialized dry bag. The floor cooler has a removable tray. DO NOT use abrasive cleaners or place in a dishwasher. Use a mild biodegradable soap only. Section 4 Boarding Platform The boarding platform of your boat is a convenient feature to enhance the watersports experience. There are serious safety concerns regarding the use of the platform. Correct Craft, Inc. has placed warning labels at the driver’s position, on the deck at the rear of the occupant area and on the transom. Refer to Section 1, Safety, for more information. To remove the boarding platform, pull the pins (A) located in the mounting brackets, under the platform and lift the platform vertically. ACORC226 A spinning propeller or carbon monoxidecan cause death or serious injury. DO NOT use the boarding platform when the engine is running or for anyother purpose than boarding the boat or preparation forentering the water. ! The boarding platform must be attached when the boat is in use. 4-42 Controls and Indicators Engine Cooling Water Intake Valve Your Nautique is equipped with a valve (seacock) on the engine cooling water intak...