Removing broken or worn cutting line. For best results, replace the cutting line when worn to no less than 20 mm from the edge of the cutting head. (Fig F) Using the pip in the centre of the line, pull the line upwards and out of the cutting head. (Fig G) G USE 8 8 Replacing the Cutting Line USE H J K Insert one end of the cutting line into the centre of the cutting head and push until the end of the line comes out at one end of the slot. (Fig. H) Secure the centre piece of the cutting line into

The operator is responsible for following the warning and safety instructions in this manual and on the Hedgetrimmer. Explanation of Symbols on the HT39, HT42, HT42s, HT45s, HT53s Warning. Read the user instructions carefully to make sure you understand all the con- trols and what they do. Switch off! Remove plug from mains before adjusting, cleaning or if cable is entangled or damaged. Keep the cable away from the blade. Do not use in the rain or leave the Hedgetrimmer outdoors while raining. T

IF ANY PARTS ARE MISSING CONTACT:- Electrolux Outdoor Products Customer Service Department direct Telephone : 01325 300303 Fax : 01325 318193 HT39/HT42 HT42s/HT45s/HT53s instruction manual Switch levers blade cover instruction manual Switch levers blade cover 1 Carton Contents IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Electrolux Outdoor Products Customer Service Department direct Telephone : 01325

Switch off, remove plug from mains and condition; examine electric supply cable for damage or -if the Hedgetrimmer starts to vibrate abnorageing before winding cable for storage. Do mally. Check immediately. Excessive vibranot repair a damaged cable, replace it with a tion can cause injury. new one. Use only Flymo replacement -before passing to another person. cable. Maintenance and storage 12. Always wind cable carefully, avoiding kink- 1. Keep all nuts, bolts and screws secure to be ing. sure

See Fig. F. A slight downward tilt of the cutting blades in the direction of motion gives the best cutting results. Side Cutting When trimming the sides of the hedge, begin at the bottom and cut upwards (See Fig. G), tapering the hedge inward at the top. This shape will expose more of the hedge, resulting in more uniformed growth. F G 5 Caring for your Hedgetrimmer Fault Finding Hints Fails to Operate 1. Is the Power Turned On? 2. Check the fuse in the plug, if blown replace. 3. Fuse continues t

2. Swing trimmer in and out of the cutting area taking small cuts. F Spool Cap 7 • WARNING Disconnect from the mains electricity supply, before attempting any maintenance or adjustment. Cutting head continues to rotate after the trimmer has been switched off. To remove spool cap 1. Press and hold in the two cap release latches. See fig G. 2. Pull cap away from the cutting head. See fig H. When refitting the spool cap 1. Keep all areas of the cap and spoolholder clean. Failure to do so may preven

2. There are 3 holes on the wall bracket. Position the wall bracket with the two holes at the top. See Fig H. 3. Ensure that when the trimmer is attached the bottom of the trimmer is within 4 inches (100 mm) of the ground, this will make it easier to hang the trimmer and will also ensure that the wall bracket is within easy reach of an electric socket to allow the charger to be plugged in. 4. Fix wall bracket securely to the wall with the plugs and screws provided. 5. Your cordless trimmer can n

Locate the upper shaft and snap together firmly. • The unit is correctly assembled when the gap between the upper and lower shaft has been closed. 3 Assembly Instructions Cable Restraint (D) & (E) 1. Form loop in mains cable and push the loop through the slot as illustrated in picture (D). 2. To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (E). C B 2 1 4 Safety Guard Assembly (B) & (C) 1. Align the arrow on the top of the safety guard (B1

® ® IMPORTANT INFORMATION S DK E P I VIKTIG INFORMATION GB Read before use and retain for future Las anvisningarna fore anvandningen reference och spara dem for framtida behov D F NL N SF WICHTIGE INFORMATION VIGTIGE OPLYSNINGER Bitte vor dem Benutzen des Gerates Du bor l.se brugsanvisningen for durchlesen und gut aufbewahren brug og gemme til senere henvisning RENSEIGNEMENTS IMPORTANTS INFORMACION IMPORTANTE A lire avant usage et a conserver pour Lease antes de utilizar y conservela reference u

IF ANY PARTS ARE MISSING CONTACT: Flymo/Partner Customer Service Department direct Telephone : 01325 300303 Fax : 01325 318193 CONTENTS 2 SAFETY If not used properly this trimmer can be dangerous! This trimmer can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this trimmer. The operator is responsible for following the warning and safety instructions in this manual and on the trimmer. Expl