Évaluations - 4, GPA: 3.5 ( )

Fabricant : Elta Taille : 947.44 kb Nom Fichier : ca2bce04-a70b-6834-c5f0-2221c3a29284.pdf Langue d'enseignement:

• Clean the device as in Care and Maintenance. • Before using the device check any damage, especially on the door (3) and sealing of the door. Should the device be damaged in way, do not use it. • Without the ball bearing (4) and rotation plate (6) properly installed you should not use the device. the ball bearing and place the rotation plate on the actuator (5) . • Make sure that the door opens and closes Immediately remove any dirt or other contamination of the doors sealing. INSTALLMENT OF THE DEVICE • No items should be placed on the device at any time. • Place the device on a stable, flat surface. • Make sure that there is enough space behind the device. The (1) should be kept free at all times. Allow for at least 200mm of space above, 100mm behind and 50mm on the sides of the device. • The feet of the device should never be removed. • Do not position the device where it may be exposed to excessive heat or moisture, and check that no flammable objects are in its immediate vicinity. • Placing the device close to radio or TV devices may cause disturbances of their reception. Advice on avoiding and eliminating disturbances of reception: - Regularly clean the door and sealing of the door. - Readjust the antenna of your radio or TV set. - Increase the distance between your microwave and radio or TV set. - Connect the microwave to a different power outlet than those of your radio or TV set. • Make sure that the device is connected to a properly installed power outlet. • The power plug (8) should always be easily accessible so as to allow immediate disconnection in case of emergency. • The power cable (8) should run beneath the device and should not touch sharp edges or hot surfaces. • The device is only designed for use indoors. MICROWAVE POWER SETTING LEVELS Setting ..........................................Use Low ........................................To keep meals or liquids warm Defrost ....................................To de-freeze fish, meats, poultry, etc. Med ........................................To gently warm meals and liquids M. high ....................................To heat previously de-frozen meals High ........................................To quickly heat meals and liquids OPERATION • Open the door. • Place meal or liquid and suitable container on the rotation plate. Place the thickest parts of the meal on the sides of the container or plate. Covering meals • Cover meals with a suitable cover to allow equal distribution of heat. This also prevents squirting or drying of meals. Protecting meals • Thin pieces of meat or poultry should be covered by a suitable foil to prevent excessive heating. Stirring meals • If possible, stir once or twice from the outside towards the centre of the meal or liquid. Moving or flipping meals 11 12 GB GBGB • Meals such or poultry should be once during heating. be flipped multiple allow equal heating. of the container to the sides during heating. Idle period • Heated liquids or drinks may bubbl...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :