Évaluations - 4, GPA: 4.5 ( )

Fabricant : Cannon Taille : 1.19 mb Nom Fichier : Langue d'enseignement:

Lift the upper flue up to the ceiling and secure it by means of the 2 screws (L). 4) Filtering version: a) Fit the baffle (M) to the upper flue using 4 flat- headed screws (N). Connect a flexible hose of 12.5 cm diameter to the baffle locking it with a hose clamp (hose and clamp not provided). b) Take the decorative flue and rest it on the hood. Lift the upper flue up to the ceilingand secure it using the 2 screws (L). c) Lift the lower flue holding it firm with some adhesive tape and connect the flexible hose to the reducer (E) with a hose clamp (not provided). 5 Technical information GB Electrical connection Power cable ! Arrange the electrical power supply within the ! Warning: The hood is fitted with a specially decorative flue dimensions. prepared cable; if the cable is damaged, it must ! When making the electrical connections, check that be replaced with a cable or special cable the voltage values correspond to those indicated on assembly, available at the manufacturer or its the data plate inside the appliance itself. technical service. ! In case your appliance is not furnished with a non separating flexible cable and has no plug, or has not got any other device ensuring omnipolar disconnection from the electricity main, with a contact opening distance of at least 3 mm, such separating device ensuring disconnection from the main must be included in the fixed installation. ! If your unit features a power lead and plug, position this so the plug is accessible. Technical data Model BHC90 BHC110 Dimensions width 89.8 cm height 83 / 125 cm depth 49 cm Outlet pipe diameter 15 cm width 109.8 cm height 83 / 125 cm depth 49 cm Outlet pipe diameter 15 cm Gross weight 24.5 Kg 29.2 Kg Absorption Total 410 W Total 410 W Motor 1x370 W Motor 1x370 W Lamps 2x20 W Lamps 2x20 W Flow rate 625 m3/h 625 m3/h Grease filters Suction surface area 461 cm2 544 cm2 6 Description The hood may be in the filtering or ducting version. Decide from the outset which type is to be installed. For better efficiency, we recommend installing the hood in the ducting version (if possible). Filtering version The hood aspirates air from the kitchen impregnated with fumes and smells, purifies it through the grease filters and the charcoal filter, and then circulates clean air back into the room. This version requires an air baffle (M) and a charcoal filter (P). In order to maintain constant efficiency, the charcoal filter must periodically be replaced. If the hood is not fitted with the charcoal filter, request one from the dealer. M P Ducting version The hood aspirates air from the kitchen impregnated with fumes and smells, passes it through the grease filters and then expels it to the outside through an exhaust duct. For this version the charcoal filter does not need to be used. GB 7 Operation Controls GB LIGHTING MOTOR DECREASE INCREASE BOOST SPEED Light button Turns the lights on/off. Motor button Activates/deactivates the motor. The motor is activated at the last speed set. Speed decrease button Repeatedly pressing the button will reduce the motor speed until reaching the m...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :