Évaluations - 4, GPA: 4.3 ( )

Fabricant : AEG Taille : 1.19 mb Nom Fichier : BHC90_BHC110_C00260639.pdf Langue d'enseignement:

Speed increase button Repeatedly pressing the button will increase the motor speed until reaching the maximum speed. Boost speed button Activates the motor at boost speed for 10 minutes, after which the motor goes back to running at the speed set previously. 8 Maintenance ! Always switch off the electricity supply before carrying out any cleaning or servicing operations on the appliance. ! To avoid possible risks of fire always comply with the indicated instructions when cleaning grease filters and when removing grease deposits from the appliance. Careful maintenance will assure good functioning and good efficiency over time. Cleaning the hood Any fat deposits should be removed from the appliance periodically depending on amount of use (at least every 2 months). Avoid using abrasive or corrosive products. To clean painted appliances on the outside, use a cloth dipped in lukewarm water and neutral detergent. To clean steel, copper or brass appliances on the outside, it is always best to use specific products, following the instructions on the products themselves. To clean the inside of the appliance, use a cloth (or brush) dipped in denatured ethyl alcohol. Cleaning the grease filters To remove the grease filters, turn the panel by gripping it from the front part of the hood; remove the grease filters by pushing the catch towards the rear of the hood and turning the filters outwards. Wash the filters by hand or in the dishwasher using a neutral detergent. If they are washed in the dishwasher, any loss of colour will not jeopardise functioning of the filters in any way. Clean the grease filters every 2 months on average depending on how heavily the hood is used. Replacing the charcoal filter If using the hood in the filtering version, the charcoal filter (P) will periodically have to be replaced. First of all, turn the panel and remove the metal grease filters. Push the catch towards the inside and remove the charcoal filter from its seat. Replace the charcoal filter with one of the same type by carrying out the operations in reverse order. Replace the charcoal filter on average every 6 months depending on how heavily the hood is used. Replacing the lamps Pay particular ATTENTION when carrying out this operation and remember to remove the voltage. To replace the halogen lamps, open the cover by prising in the slots. Replace with lamps of the same type. WARNING: Do not touch the new lamp with bare hands. GB 9 Precautions and tips GB General safety ! The distance between the supporting surface for the cooking vessels on the hob and the lower part of the hood must be at least 65 cm. If the instructions for installation for the hob specify a greater distance, this has to be taken into account. ! ATTENTION: This appliance must be grounded. When making the electrical connection, ensure that the power outlet is earthed. When making the electrical connections, check that the current socket has a ground connection. ! Avoid using materials which could cause spurts of flame (flambees) near the appliance. ! When frying, take particular care to prevent oil ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :