Évaluations - 4, GPA: 3.8
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
The screen is made of glass and can be damaged if dropped, hit or scratched. 10 10 Locate your monitor near an easily accessible AC outlet. 11 11 If your monitor does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately and contact an authorized dealer or service center. 12 12 High temperatures can cause problems. Don’t use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat. 13 13 Unplug the monitor when it is going to be left unused for an extended period of time. 14 14 Unplug your monitor from the AC outlet before any service. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. English - 2 English - 3 Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Connecting Your Monitor 1 Turn off your computer and unplug the power cord. 2 Signal cable Connect the end of the signal cable to your computer’s video port (Video board, video card, or graphics card). If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter (Adapter not included). A PC-compatible computer does not need an adapter. 3 Power port Connect the power cord for your monitor to the power port on the back of the monitor. 4 Power cords Plug the power cord for the monitor and the power cord for your computer into a nearby outlet. 5 Turn on your computer and monitor. If your monitor displays an image, installation is complete. 6 Install monitor driver • Insert the provided diskette into the A drive. • Double click the “install.exe” file. Manual Stand Monitor Power Cord Warranty card (Not available in all locations) Driver Installation Diskette (Not available in all locations) EXIIT MENU 3 2 4 (Adapter not included) Your New Monitor 3p-4p.fm Page 3 Friday, December 1, 2000 11:05 AM English - 4 Italiano Portuguese Deutsch Espanol Francais English Front Panel 1 EXIT ( ) button Closes the On Screen Display. It is also used to return to the previous menu when using the on-screen menu system. 2 The / ( / ) buttons These buttons allow you to select and adjust items using the on-screen menu. When adjusting an item using the on-screen menu, the button lowers the value of the selected function. The button raises the value of the selected function. These buttons are also direct access buttons for the Contrast and Brightness feature controls. (See the section below on Direct Access Buttons.) 3 MENU ( ) button Opens the on-screen menu. It is also used to select a highlighted function, open a sub-menu, or move between menus when using the on-screen menu system. 4 Power button The power button turns the monitor on and off. The power indicator light glows green during normal operation, see page 11. Direct Access Buttons Most of the adjustments you make to your monitor will be accessed through the on-screen menu described in the next section. The Contrast and Brightness features can also be accessed directly from the front of your monitor. 1 With the menu off, press the or button on the front of your monitor. The button accesses the Brightness feature. The button accesses the Contrast feature. 2 Push the button to increase or the button to decrease the value of the selection. 3 Press the EXIT button twice to exit the on-screen menu. EXIIT MENU 1 2 3 4 EXIIT MENU Your New Monitor 3p-4p.fm Page 4 Friday, December 1, 2000 11:05 AM 5p.fm Page 5 Thursday, November 9, 2000 10:51 AM Operation On Screen Display(OSD) Your monitor has an OSD, accessed by the buttons on the front of your monitor, that allows you to adjust characteristics of the screen image. Display changes are indicated by on-screen adjustment icons. Some functions have sub-menus. Push the menu button to display the main menu.1 Function icons are arranged across the top of the OSD. 2 2 or button to move through the icons. Push the The name of the function will appear below the rows of function icons. or button to highlight the feature you want to adjust, then push the the options for adjustment. If there is a sub-menu, use the 3 3 To select a function or open a sub-menu, push the button. The screen will display button to select it. decreases values. On-screen calibration numbers show the effect of your adjustment. If you are in a sub-menu, use the EXIT button 4 4 buttons to make adjustments. and andUse the increases values to return to the previous menu. 5 5 Push the EXIT button to exit and save your changes. Function icons Active function Adjustment icons Function selection and Menu navigation : : Brightness Access Function Exit Menu English - 5 5p.fm Page 6 Thursday, November 9, 2000 10:51 AM Operation Icon Monitor Function Control Brightness Background brightness of screen. -– Decreases brightness + Increases brightness...
Ce manuel est également adapté pour les modèles :Moniteurs - 56E (895.33 kb)