Évaluations - 1, GPA: 3
(
)
)
|
Photos et spécifications Sony CMT-EH10 |
Facilité d'utilisation
side first, matching the polarities shown below. Notes on using the remote • With normal use, the batteries should last for about six months. • Do not mix an old battery with a new one or mix different types of batteries. • If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. To set the clock 1 Turn on the system. Press ... (power) .. 2 Select the clock set mode. Press CLOCK/TIMER SET . on the remote. If the current mode appears on the display, press ./. . on the remote repeatedly to select “CLOCK,” and then press ENTER . on the remote. 3 Set the time. Press ./. . on the remote repeatedly to set the hour, and then press ENTER . on the remote. Use the same procedure to set the minutes. The clock settings are lost when you disconnect the power cord or if a power failure occurs. Selecting a music source Press the following buttons (or press FUNCTION . repeatedly). To select Press CD CD . on the remote. Tuner TUNER/BAND .. Tape TAPE . on the remote. Component* (connected using an audio cord) FUNCTION . repeatedly until “AUDIO IN” appears. * If the component has the AVLS (Automatic Volume Limiter System) or BASS BOOST function, turn off the function to avoid distorted sound from the speakers. Adjusting the sound To adjust the volume Press VOLUME +/– on the remote (or turn the VOLUME control on the unit) .. To add a sound effect To Press Generate a more dynamic sound (Dynamic Sound Generator X-tra) DSGX . on the unit. Set the sound effect EQ . on the remote. Playing a CD/MP3 disc 1 Select the CD function. Press CD on the remote (or FUNCTION repeatedly) .. 2 Place a disc. Press .PUSH OPEN/CLOSE on the unit, and place a disc with the label side up on the CD compartment. To close the CD compartment, press .PUSH OPEN/ CLOSE on the unit. .PUSH OPEN/CLOSE 3 Start playback. Press . (play) . (or CD/. (play/pause) . on the unit). To Press Pause playback . (pause) . on the remote (or CD/. . on the unit). To resume play, press it again. Stop playback . (stop) .. Select a folder on an MP3 disc +/– .. Select a track or file ... (go back/go forward) on the remote (. . on the unit) .. Find a point in a track or file Hold down ./. (rewind/fast forward) . during playback, and release it at the desired point. Select Repeat Play REPEAT . on the remote repeatedly until “REP” or “REP1” appears. To change the play mode Press PLAY MODE . on the remote repeatedly while the player is stopped. You can select normal play (“” for all MP3 files in the folder on the disc), shuffle play (“SHUF” or “ SHUF*”), or program play (“PGM”). * When playing a CD-DA disc, (SHUF) Play performs the same operation as SHUF Play. Notes on Repeat Play • All tracks or files on a disc are played repeatedly up to five times. • “REP1” indicates that a single track or file is repeated until you stop it. Notes on playing MP3 discs • Do not save other types of tracks or files or unnecessary folders on a disc that has MP3 files. • Folders that have no MP3 files are skipped. • MP3 files are played back in the order that they are recorded onto the disc. • The system can only play MP3 files that have a file extension of “.MP3”. • If there are files on the disc that have the “.MP3” file extension, but that are not MP3 files, the unit may produce noise or may malfunction. • The maximum number of: – folders is 150 (including the root folder). – MP3 files is 255. – MP3 files and folders that can be contained on a single disc is 256. – folder levels (the tree structure of files) is eight. • Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all. Notes on playing multisession discs • If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and playback continues until another session is encountered. • A disc with a mixed CD format is recognized as a CD-DA (audio) disc. Listening to the radio 1 Select “FM” or “AM.” Press TUNER/BAND . repeatedly. 2 Select the tuning mode. Press TUNING MODE . on the remote repeatedly until “AUTO” appears. 3 Tune in the desired station. Press +/– on the remote (or TUNING + or – on the unit) .. Scanning stops automatically when a station is tuned in. When you tune in a station that provides RDS services, the station name appears on the display. Tip To stop automatic scanning, press . (stop) .. To tune in a station with a weak signal Press TUNING MODE . on the remote repeatedly until “MANUAL” appears, and then press +/– on the remote repeatedly (or TUNING + or – on the unit) . to tune in the desired station. To reduce static noise on a weak FM stereo station Press FM MODE . on the remote repeatedly until “MONO” appears to turn off stereo reception. Playing a tape Use buttons on the unit for the operation. 1 Select a tape function. Press FUNCTION repeatedly (or TAPE on the remote) .. 2 Insert a tape...