Évaluations - 2, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
(MHC-R500/RX55 only) Table of Contents Getting Started Step 1: Hooking up the system ............ 4 Step 2: Setting the time ......................... 6 Step 3: Presetting radio stations .......... 7 Connecting optional AV components .. 9 Connecting outdoor antennas ............ 10 Basic Operations Playing a CD ......................................... 11 Recording a CD .................................... 13 Listening to the radio ........................... 14 Recording from the radio .................... 15 Playing a tape ........................................ 16 Recording from a tape ......................... 18 The CD Player Using the CD display........................... 19 Playing the CD tracks repeatedly ...... 20 Playing the CD tracks in random order ................................................ 21 Programming the CD tracks ............... 22 The Tape Deck Recording on a tape manually ........... 24 Recording CDs by specifying the track order ...................................... 25 Sound Adjustment Adjusting the sound ............................ 27 Selecting the audio emphasis ............. 27 Activating the surround effect ........... 28 Other Features Falling asleep to music ........................ 29 Waking up to music ............................. 29 Timer-recording radio programs ....... 31 Additional Information Precautions ............................................ 33 Troubleshooting ................................... 34 Specifications ........................................ 37 Index ....................................................... 39 Getting Started Getting Started Step 1: Hooking up the system Do the following procedure 1 to 5 to hook up your system using the supplied cords and accessories. AM loop antenna FM antenna Left speakerRight speaker 54123 Insert only the stripped portion. 1 Connect the speakers. Connect the speaker cords to the SPEAKER jacks of the same color. Keep the speaker cords away from the antennas to prevent noise. Black (O) + – R L Red (O) Note The type of supplied speakers varies according to the model you purchased (see “Specifications” on page 38). 2 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Jack type A AM loop Extend the FM lead antenna antenna horizontally. AM FM(75 ) Jack type B AM loop Extend the FM lead antenna antenna horizontally. AM FM(75 ) 3 Set VOLTAGE SELECTOR to position of your local power line voltage (for models with a voltage selector). 4 Connect the power cord to a wall outlet. The demonstration appears in the display. If the plug on this unit does not fit your wall outlet, attach the supplied plug adaptor (for Asian model). 5 Deactivate the demonstration mode by pressing DISPLAY/DEMO when the system power is turned off. The demonstration mode is also deactivated when you set the time. Inserting two size AAA (R03) batteries into the remote Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. VOLTAGE SELECTOR 110-120V 220-240V Step 2: Setting the time You must set the time before using the timer functions. You can set the time while the power is off. For European models, the clock is on a 24-hour system. For other models, the clock is on a 12-hour (AM/PM) system. The 24-hour system model is used for illustration purpose. 1 DISPLAY/DEMO 3,5 2,4 1 Press CLOCK/TIMER SET. The hour indication flashes. 2 Turn the jog dial to set the hour. 3 Press ENTER/NEXT. The minute indication flashes. 4 Turn the jog dial to set the minute. 5 Press ENTER/NEXT. The clock starts working. To change the preset time You can also change the time while the power is on. 1 Press CLOCK/TIMER SET. 2 Turn the jog dial until “SET CLOCK” appears, then press ENTER/NEXT. 3 Repeat steps 2 to 5 in “Setting the time”. Tips • If you’ve made a mistake, start over from step 1. • Setting the time deactivates the demonstration mode. If you want to display the demonstration mode, press DISPLAY/DEMO when the power is off. Step 3: Presetting radio stations You can preset the following number of stations: – 2 band model: 20 for FM, 10 for AM – 3 band model: 20 for FM, 10 for MW, and 10 for LW The band you can select depends on the kind of tuner built into your system. Confirm the bands by pressing TUNER/ BAND repeatedly. 1/u 4 31 (power) 225 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Every time you press this button, the band changes as follows: 2 band model: FM .AM 3 band model: FM nMW nLW 2 Press and hold + or – until the frequency indication starts to change automatically, then release it. Scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. TUNED STEREO VOLUME ALL DISCS MHz 3 Press REPEAT/MEMORY. A preset number appears in the display. ...
Ce manuel est également adapté pour les modèles :Stéréo - MHC-GRX3 (425.88 kb)
Stéréo - MHC-R300 (425.88 kb)
Stéréo - MHC-RX55 (425.88 kb)