Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
If the green Indicator above the key lights up as well, that Track has been already loaded. So, if you do not want lose that data, choose other empty Track. (Ï) Press the Reset Key. ¡¡SIB Ptfl **■ (5) Press the Load Key. i f J U O J. The Load Indicator starts blinking. Now, playing the keyboard will automatically start loading. The Load Indicator stops blinking and remains lighted. Here, the measure number in the Display Window does not represent accurate measure, but can be used like a Tape Counter. k/ ■ 1 - - ■ ■ i (7) To stop loading, press the Stop Key. < n f Li (Loaded up to 10) The Stop Indicator lights up and the Load Indicator goes out. • Lead With Bar Lines Set the Mode Switch to the Normal position and the Load Mode Switch to Real Time. © Make sure that your synthe -sizer generates desirable sound. FREE 1 2 3 4 5 6 C o v_y (?) Be sure that the Beat Per Measure Indicator lights, then set the Beat Per Measure Switch to the 1,2,3, 4, 5, 6 or 8 position, depending on the music you are to load. * If you wish to see the number of the measure currently playing, set the Display mode, to Measure/Chain by using the Display Switch on the left of the Display. * If you need metronome sound to play to, set the Metronome Switch to Load/ Play. ® Press any Track Key you like. C4) Press the Reset Key. (5) Press the Load Key. □ U. (4 beat) The red Indicator under the selected key will light up. If the green Indicator above the key light up, that Track has been already loaded. So, if you do not want to lose that data, 'choose other empty Track. When the I NT is selected in the Clock Source Section, actual loading will start from the 3rd measure. If other than I NT Is selected (= external signal controls the MSQ-700), the Display initially shows | rdy | and loading will start the moment the externa! device starts running or the DP-2 connected to the Start/Stop Jack is pressed. When loading starts, the Load Indicator stops blinking and remains lighted. Note When you have reached the last measure of the music, press the Stop Key. (Loaded up to 6) The Stop Indicator will start flashing. Loading will automatically stop in the end of the measure and the Stop Indicator stops flashing and remains lighted. • If the Protect Switch on the rear panel Is set to ON, pressing the Load Key will cause the Display Window to show "Prot" for about a second. • If all the memory capacity is used up, the Display shows "FULL" and the MSQ-700 automatically stops loading. If this happens, the data may not be played properly. Step Load In this mode, only pitches can be loaded step by step. The timing values are the same (= the shortest timing value set with the Resolution Switch) throughout the whole music unless you purposely change it by using the Tie or Rest Keys. FREE 1 2 3 4 5 6 C © Find out the shortest note in the music piece you are to load. Then represent the entire score with the shortest timing value. (D Be sure that the MSQ-700 is not running. CD Set the Load Mode Switch to the position. © Make sure that the Beat Per Measure Indicator lights, and set the Beat Per Measure Switch to an appropriate position according to the music you are to load. If none of the 7 options (1, 2, 3, 4, 5, 6 and 8) applies to the music you are to load, set it- to the Free position. CD Set the Load Mode Switch to STEP. CD Make sure that the Resolution Indicator lights and select the appropriate Resolution according to the shortest timing value in your music. The Stop Indicator lights up. \ > (7) Press any Track Key you t like. 1 •s Press the Load Key. if) If loading has been completed, press the Stop Key. c J The red Indicator under it will light up. Here, If the green indicator above the key lights up as well, data is previously loaded in that Track. So, if you do not want to erase the existing data, select other empty Track. The Indicator starts flashing. The MSQ-700 is now in the Load mode, so you can start loading at any time. * Each time a chord, a single note or rest is loaded, one step (=shortest timing set with the Resolution Switch) is advanced. * How you play the keyboard does not affect the timing value of each note; all the notes will be loaded In the same length. Please note that the pitches are loaded the moment the keys are released. ■ Step Value If the shortest timing value is 16th note, quarter note and eighth note can be replaced as shown below. J J ft ft ft ft J5 ft ? ft ft ^ ^ ft tj 3 tj ^ R si ' J b In the DCB mode, if you wish to load a chord which cannot be pressed at the same time, turn on the Hold function of the keyboard and play each key one after another, then turn off the Hold. The shortest timing value is counted one step, so if 16th note = 1' setp, eighth note = 2 steps and quarter note = 4 steps. In this way, about 6500 steps notes (In single note) can be loaded Into the MSQ-700. (Even if you load a quarter note with four of sixtee...