In actuality, automix will start when the next TIMING CLOCK is received after receiving the CONTINUE message. STATUS 11111011 FB Continue 2.9 STOP (FC) Reception This message is received if the automix TIME REFERENCE setting is MIDI CLOCK, and will cause automix to stop. STATUS 11111100 FC Stop 2.10 ACTIVE SENSING (FE) Reception Once this message has been received, the failure to receive any message for an interval of 400 ms or longer will cause MIDI transmission to be initialized, such as by clearing the Running Status. STATUS 11111110 FE Active sensing 2.11 SYSTEM RESET (FF) Reception When this message is received, MIDI communications will be cleared, e.g., by clearing the Running Status. STATUS 11111111 FF System reset 2.12 SYSTEM EXCLUSIVE MESSAGE (F0) 2.12.1 MIDI MACHINE CONTROL (MMC) These messages are transmitted when the Machine Control section of the DM1000 is operated. 2.12.2 BULK DUMP This message sends or receives the contents of various memories stored within the DM1000. The basic format is as follows. For DUMP DATA F0 43 0n 7E cc cc tt mm mm [Data …] cs F7 For DUMP REQUEST F0 43 2n 7E tt mm mm F7 n Device Number cc cc DATA COUNT (the number of bytes that follow this, ending before the checksum) 4C 4D 20 20 38 43 39 31 Model ID tt DATA TYPE mm mm DATA NUMBER cs CHECK SUM A unique header (Model ID) is used to determine whether the device is a DM1000. CHECK SUM is obtained by adding the bytes that follow BYTE COUNT (LOW) and end before CHECK SUM, taking the binary compliment of this sum, and then setting bit 7 to 0. CHECK SUM = (-sum)&0x7F Reception This message is received if [Bulk RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. When a bulk dump is received, it is immediately written into the specified memory. When a bulk dump request is received, a bulk dump is immediately transmitted. Anhang DM1000 Version 2—Bedienungsanleitung 368 Anhang C: MIDI Transmission This message is transmitted on the [Tx CH] by key operations in the [MIDI]-[ BULK DUMP] screen. A bulk dump is transmitted on the [Rx CH] in response to a bulk dump request. The data area is handled by converting seven words of 8-bit data into eight words of 7-bit data. Conversion from actual data into bulk data d[0~6]: actual data b[0~7]: bulk data b[0] = 0; for( I=0; I<7; I++){ if( d[I]&0x80){ b[0] |= 1<<(6-I); } b[I+1] = d[I]&0x7F; } Restoration from bulk data into actual data d[0~6]: actual data b[0~7]: bulk data for( I=0; I<7; I++){ b[0] <<= 1; d[I] = b[I+1]+(0x80&b[0]); } 2.12.2.1 Scene memory bulk dump format (compress) The DM1000 can transmit and receive scene memories in compressed form. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture’s ID number (YAMAHA) SUB STATUS 0000nnnn 0n n=0-15 (Device number=MIDI Channel) FORMAT No. 01111110 7E Universal bulk dump COUNT HIGH 0ccccccc ch data count = ch * 128 + cl COUNT LOW 0ccccccc cl 01001100 4C ‘L’ 01001101 4D ‘M’ 00100000 20 ‘ ’ 00100000 20 ‘ ’ 00111000 38 ‘8’ 01000011 43 ‘C’ 00111001 39 ‘9’ 00110001 31 ‘1’ DATA NAME 01101101 6D ‘m’ 0mmmmmmm mh m=0-99, 256, 8192(Scene0-99, EDIT BUFFER, UNDO) 0mmmmmmm ml Receive is effective 1-99, 256, 8192 BLOCK INFO.0ttttttt tt total block number(minimum number is 0) 0bbbbbbb bb current block number(0-total block number) DATA 0ddddddd ds Scene data of block[bb] :: 0ddddddd de CHECK SUM 0eeeeeee ee ee=(Invert(‘L’+…+de)+1)&0x7F EOX 11110111 F7 End of exclusive 2.12.2.2 Scene memory bulk dump request format (compress) The second and third bytes of the DATA NAME indicate the scene number that is being requested. If this is 256, the data of the Edit Buffer will be bulk-dumped. If this is 8192, the data of the Undo Buffer will be bulk-dumped. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture’s ID number (YAMAHA) SUB STATUS 0010nnnn 2n n=0-15 (Device number=MIDI Channel) FORMAT No. 01111110 7E Universal bulk dump 01001100 4C ‘L’ 01001101 4D ‘M’ 00100000 20 ‘ ’ 00100000 20 ‘ ’ 00111000 38 ‘8’ 01000011 43 ‘C’ 00111001 39 ‘9’ 00110001 31 ‘1’ DATA NAME 01101101 6D ‘m’ 0mmmmmmm mh m=0-99, 256, 8192(Scene0-99, EDIT BUFFER, UNDO) 0mmmmmmm ml EOX 11110111 F7 End of exclusive 2.12.2.3 Setup memory bulk dump format Of the setup memory of the DM1000, this bulk-dumps data other than the User Defined MIDI Remote, User Defined Keys, User Assignable Layer, Control Change Table, and Program Change Table. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture’s ID number (YAMAHA) SUB STATUS 0000nnnn 0n n=0-15 (Device number=MIDI Channel) FORMAT No. 01111110 7E Universal bulk dump COUNT HIGH 0ccccccc ch data count = ch * 128 + cl COUNT LOW 0ccccccc cl 01001100 4C ‘L’ 01001101 4D ‘M’ 00100000 20 ‘ ’ 00100000 20 ‘ ’ 00111000 38 ‘8’ 01000011 43 ‘C’ 00111001 39 ‘9’ 00110001 31 ‘1’ DATA NAME 01010011 53 ‘S’ 00000010 02 00000000 00 No.256 = Current BLOCK INFO.0ttttttt tt total block number(minimum number is 0) 0bbbbbbb bb current block number(0-total block n...
)
