Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
This data cannot be transmitted via control change to Studio Manager since there is no guarantee that the contents of the tables will match. (Parameter Change messages will always be used.) If [TABLE] is selected STATUS 1011nnnn Bn Control change DATA 0nnnnnnn nn Control number (0-95, 102-119) 0vvvvvvv vv Control Value (0-127) If [NRPN] is selected STATUS 1011nnnn Bn Control change DATA 01100010 62 NRPN LSB 0vvvvvvv vv LSB of parameter number STATUS 1011nnnn Bn Control change *1 DATA 01100011 63 NRPN MSB 0vvvvvvv vv MSB of parameter number STATUS 1011nnnn Bn Control change *1 DATA 00000110 06 MSB of data entry 0vvvvvvv vv MSB of parameter data STATUS 1011nnnn Bn Control change *1 DATA 00100110 26 LSB of data entry 0vvvvvvv vv LSB of parameter data *1) The second and subsequent STATUS need not be added during transmission. Reception must be implemented so that reception occurs whether or not STATUS is present. 2.4 PROGRAM CHANGE (Cn) Reception If [Program Change ECHO] is ON, these messages are echoed from MIDI OUT. If [Program Change RX] is ON and the [Rx CH] matches, these messages will be received. However if [OMNI] is ON, they will be received regardless of the channel. When a message is received, a Scene Memory will be recalled according to the settings of the [Program Change Table]. Transmission If [Program Change TX] is ON, this message is transmitted according to the settings of the [Program Change Table] on the [Tx CH] channel when a scene memory is recalled. If the recalled scene has been assigned to more than one program number, the lowest-numbered program number will be transmitted. Transmission to Studio Manager using Program Change messages will not be performed since there is no guarantee that the contents of the tables will match. (Parameter Changes will always be used.) STATUS 1100nnnn Cn Program change DATA 0nnnnnnn nn Program number (0-127) 2.5 SONG POSITION POINTER (F2) Reception If this is received when the automix TIME REFERENCE setting is MIDI CLOCK, the automix will move to the song position that was received. STATUS 11110010 F2 Song position pointer DATA 0vvvvvvv vv Song position LSB 0vvvvvvv vv Song position MSB 2.6 TIMING CLOCK (F8) Reception If the automix TIME REFERENCE setting is MIDI CLOCK, this message is used to synchronize automix. It is also used to control effects. This message is transmitted 24 times per quarter note. STATUS 11111000 F8 Timing clock 2.7 START (FA) Reception This message is received if the automix TIME REFERENCE setting is MIDI CLOCK, and will start the automix. In actuality, automix will start when the next TIMING CLOCK is received after receiving the START message. STATUS 11111010 FA Start 2.8 CONTINUE (FB) Reception This message is received if the automix TIME REFERENCE setting is MIDI CLOCK, and will cause automix to start from the current song position. In actuality, automix will start when the next TIMING CLOCK is received after receiving the CONTINUE message. STATUS 11111011 FB Continue 2.9 STOP (FC) Reception This message is received if the automix TIME REFERENCE setting is MIDI CLOCK, and will cause automix to stop. STATUS 11111100 FC Stop 2.10 ACTIVE SENSING (FE) Reception Once this message has been received, the failure to receive any message for an interval of 400 ms or longer will cause MIDI transmission to be initialized, such as by clearing the Running Status. STATUS 11111110 FE Active sensing 2.11 SYSTEM RESET (FF) Reception When this message is received, MIDI communications will be cleared, e.g., by clearing the Running Status. STATUS 11111111 FF System reset 2.12 SYSTEM EXCLUSIVE MESSAGE (F0) 2.12.1 MIDI MACHINE CONTROL (MMC) These messages are transmitted when the Machine Control section of the DM1000 is operated. 2.12.2 BULK DUMP This message sends or receives the contents of various memories stored within the DM1000. The basic format is as follows. For DUMP DATA F0 43 0n 7E cc cc
Instruments de musique - DM1000 (6.8 mb)