Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
n In this document the term “DME” will refer to the DME64N, DME24N, DME8i-C, DME8o-C, DME4io-C, DME8i-ES, DME8o-ES and DME4io-ES, while the term “DME Satellite” will refer only to the DME8i-C, DME8o-C, DME4io-C, DME8i-ES, DME8o-ES and DME4io-ES. n For details about the DME units refer to the manual supplied with the specific device, and for details about the DME Designer application refer to the pdf-format DME Designer manual. n If you will be using CobraNet™ for audio connections, the required bundle numbers and related settings must be made via the DME Designer application. n If you will be using EtherSound™ for audio connections, the routing and other EtherSound settings must be made via the AuviTran AVSESMonitor software available from the AuviTran website: Version Compatibility • DME Designer cannot be used to upgrade DME firmware version 3.5 or earlier to version 3.8 or later (this does not apply to the SP2060 or ICP1). Contact your Yamaha dealer or service center for this type of upgrade. • DME Designer cannot be used to downgrade DME firmware version 3.8 or later to version 3.5 or earlier (this does not apply to the SP2060 or ICP1). Contact your Yamaha dealer or service center for this type of downgrade. • DME firmware versions 3.8 or later cannot be written using DME Designer version 3.5 or earlier. • DME firmware versions 4.0 or later are required to use DME Designer versions 4.0 or later. DME Setup Manual Setup Flow . Setup Flow .Install DME Designer and DME-N Network Driver (page 5) .USB-MIDI Driver Installation (page 5) Software Installation (page 3) Basic Setup (page 7) Advanced Setup (page 13) .Connecting a single DME unit directly to a computer via USB cable • Make all necessary Mini-YGDAI card settings using DME Designer (when one or more Mini-YGDAI cards are used). • Place and connect the components. • Going Online and Checking sound output .Connecting multiple DME units to a computer via Ethernet cables • Make the required DME unit network settings. • Make the required computer network settings. • Setting the DME-N Network Driver • Take the connection online and check the sound output as described in the Basic Setup section. In-depth Information on DME Units (page 20) • Connecting to External Controllers This section covers connection to remote controllers via Ethernet or GPI. • Setting up DME64N/24N Networks via Panel Operations Describes how DME64N/24N network settings can be made via the control panel. • Related web site on DME series and peripherals This section serves as a guide to online information on Speaker Processor Components library data, Mini-YGDAI cards, and touch-panel controllers (AMX/Creston). DME-N Network Driver Setup Details (page 23) Troubleshooting & Tips (page 26) DME Setup Manual Software Installation Software Installation (Select and download the appropriate driver for your computer’s operating system. n DME Designer V4.0 supports Windows7, Windows Vista, and Windows XP. Minimum System Requirements OS Windows 7: Ultimate / Professional / Home Premium Windows Vista: Ultimate / Business / Enterprise Windows XP: Professional / Home Edition Hard Disk 300MB or more Display 1280 x 1024 pixels or higher; High Color (16-bit) or higher Other Pointing device such as a mouse Ethernet (100Base-TX/10Base-T) port or USB port Windows Vista / Windows 7 CPU 32bit: 1.4GHz or higher Intel Core/Pentium/Celeron family processor 64bit: Intel 64 compatible processor Available Memory 1GB or more (2GB or more on Windows 7 64-bit) Windows XP CPU 1GHz or higher Intel Core/Pentium/Celeron family processor Available Memory 256MB or more n The system requirements described above are applied to the DME Designer version 4.0.0. Keep in mind that the software is often updated and the system requirements are subject to change. You can check the latest version information and its system requirements at the following website. The system requirements may differ slightly depending on the particular computer. n Disable any power-saving mode on the computer. n When using the Windows Vista operating system, use only USB-MIDI Driver V3.0 or later, and DME-N Network Driver V1.2 or later. When using the Windows 7 operating system, use only USB-MIDI Driver V3.0.4 or later, and DME-N Network Driver V1.2.1 or later. DME Setup Manual Software Installation • Download the DME Designer Combo Installer Use this link to download the required software. n The DME-N Network Driver can be downloaded individually, but the DME Designer Combo Installer allows you to download and install both DME Designer and the DME-N Network Driver in one operation. DME Designer: DME system settings can be made using this dedicated application. n DME designer can be used in online mode even if a DME unit is not connected. DME-N Network Driver: This driver is needed in order for your computer and DME unit(s) to be connected...
Ce manuel est également adapté pour les modèles :Instruments de musique - DME64N (5.55 mb)