The balance of the assembly depends primarily upon the concentricity of the fan clutch and spacers with the pump shaft. Concentricity is not assured when universal type clutches or spacers are used. Universal fan clutches and spacers have a 3/4" pilot hole, so an adapter must be used when installing a water pump with a 5/8" shaft. This adapter bushing is supplied with the unit. These adapter bushings add to the machine tolerances of the assembly, so special care must be taken to maintain concent

NOTE: Removal of backing plate is not recommended,as there are no user serviceable parts in the water pump.If backing plate is removed,use no sealer on the O-ring during re-installation,and use conventional gasket sealer (not RTV silicone) on gasketed models. • SPECIFICATIONS Dimension from block surface to hub: #8850, #88502 & #8860 - 5-3/4" #8851, #88512 & #8861 - 7-5/16" #8852 & #8862 - 5-3/4" #8853 & #8863 - 7-5/16" #8854, #8864 & #88544 - 5-3/4" #8858 & #88584 - 5-1/2” WARNING Incorrect ali

If you do not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at edelbrock@edelbrock.com. IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehi

This adapter bushing is supplied with the unit. These adapter bushings add to the machine tolerances of the assembly, so special care must be taken to maintain concentricity with the shaft and the fan clutch. Failure to do so will void warranty. Edelbrock Corporation • 2700 California Street • Torrance, CA 90503 Tech Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com Catalog #8850,8851,8852,8853,8854,8858,8860, ©2008 Edelbrock Corporation 8861,8862,8863,8864,88504,88514,88544,88584 1 Brochur

426 Hemi) and 1969-1985 318-360 Chrysler V8’s Part #8814,8824, 8877 & 8887 INSTALLATION INSTRUCTIONS PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, pl

Most installations can be accomplished with common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at edelbrock@edelbrock.com. IMPORTANT NOTE: Proper i

Ofrece a la larga un enorme ahorro con mayor durabilidad y potencial de enfriamiento. • La parte #8850/#88502/#8860 es una bomba de base corta para autos de pasajeros 1965-68, camionetas de trabajo ligero 1967-72 y Corvettes 1969-70. • La parte #8851/#88512/#8861 es un diseno de base larga para autos de pasajeros 1969 y camionetas de trabajos ligeros Chevrolet 1973-86 con monobloque grande V8s (no queda en Corvettes o camionetas de trabajo pesado de mas de 1 tonelada) • La parte #8852/#8862 es u

Consult service manual for specific procedures, if necessary. CAUTION: Be sure that fan bolts don't protrude through the hub so far that they hit the water pump housing. NOTE: Removal of backing plate is not recommended,as there are no user serviceable parts in the water pump.If backing plate is removed,use no sealer on the O-ring during re-installation,and use conventional gasket sealer (not RTV silicone) on gasketed models. • SPECIFICATIONS Dimension from block surface to hub: #8850, #88502 &

Polished Aluminum Water Pump #8892 fits the same applications as #8882. • ACCESSORIES Use #8830 Spacer Kit for short style pumps to clear competition camshaft gear drives and belt drives. Kit includes 1/2" thick water pump and crank pulley spacers. • INSTALLATION Installation is the same as for original equipment water pumps, except that aftermarket reverse rotation serpentine belt pulleys MUST be used. Consult service manual for specific procedures, if necessary. CAUTION: Be sure that fan b

NOTA IMPORTANTE: La instalacion apropiada es responsabilidad del instalador. La instalacion inapropiada anulara su garantia y puede resultar en un desempeno pobre y danos al motor o vehiculo. • DESCRIPCION: La bomba de agua de aluminio Edelbrock® es una bomba de agua para trabajos pesados para aplicaciones de calle y carreras. La bomba externamente es similar a la bomba del equipo original, por lo tanto provee compatibilidad con cualquier accesorio y poleas. Ofrece a la larga un enorme ahorro co