Évaluations - 4, GPA: 4.3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
To reset the system to Single View mode: 1. Start Display properties. 2. Click Settings tab. 3. Click the second monitor among two monitor pictures. 4. Uncheck Extend my Windows desktop onto this monitor. 5. Click OK. Figure 46. Computer in Duo View Mode Using Options You can order the following options for your Notebook computer from your authorized reseller: • An extra AC adapter. • A battery pack. [Standard or Long Life size] • An upgraded hard drive. Optional hard drives are available to fit in the hard drive compartment or the 3.5" multi-bay of the docking station. • 64,128 and 256 MB SDRAM memory modules that enable you to upgrade your computer’s memory to a maximum of 320MB. • A CD-ROM drive module. [5.25" Multi-bay] • A DVD-ROM drive module. [5.25" Multi-bay] • A CD-RW drive module. [5.25" Multi-bay] • A Zip 250 Mb drive. [3.5" Multi-bay] The options that are available may change periodically. Contact your reseller for updated information on current and new options. Memory Module You can increase system memory by installing an optional 64,128 or 256 MB memory module. Before You Install Memory To prevent personal injury and damage to the equipment, follow the precautions listed here before installing a memory module. Take the following precautions when installing a memory module: • Before you remove the memory module compartment door, turn off the computer, unplug the power cord, and remove the battery. Also, disconnect any peripheral devices. • Before handling a memory module, discharge any static electricity by touching a grounded surface or using a grounding wrist strap. 72 UsersManual Using Options 73 • Do not insert objects with conductive material, such as metal screwdrivers or graphite pencils, into the memory-module compartment. • Be careful in handling the metal plate of the memory door. To avoid possible system problems, use only an approved memory module in your computer. Installing a Memory Module Handle a memory module carefully. Hold them only by the edges. To install a memory module: 1. Turn the computer over so that the bottom faces up. 2. Using a screwdriver, remove the screw that holds the memory-module compartment door in place. (Figure 47). Figure 47. Removing the Memory Module Compartment Door 3. Grasp the edge of the door and pull the door off the chassis. Memory Module Precautions: When removing the module, pull on the plastic portion of the connector slots tabs only. Do not pull on the metal part of the tabs, this may damage the tabs. 4. Remove the installed module if necessary. a. Pull the tabs on the connector slot outward slightly, until the edge of the memory module pops up. b. Hold the memory module by the edges and pull it forward out of the compartment. 5. Align the connector on the memory module with the connector of the slot. 6. Push the memory module into the slot at a slight angle until the connectors are fully engaged (Figure 48). Figure48. Instal llingaMemoryModule 7. Push down on the edge of the memory module until the module snaps into place. 8. Align the memory module compartment door with the compartment and push the door down until it snaps into place. 9. Reinstall the screw you removed in step 2. 10. Turn on the computer and perform a complete POST to check the memory integrity. 74 UsersManual Troubleshooting If you ever have difficulty running your computer, follow these steps: 1. Consult the following sections for advice on how to handle system problems. 2. If steps 1 do not help you to resolve the problem, contact your reseller. 3. Refer to warnings, cautions and notes within applicable portion of this manual. 4. Refer to “Windows” and other “Program” manuals as applicable. Operating Problems This section tells you what to do if you have problems running your computer. If any problem persists after you take corrective action, contact your reseller for assistance. The computer does nothing when you turn it on. Has the battery run down? Connect the power cord to get power and recharge the battery. Try turning on the computer again. Some of the letter keys type numbers instead of the indicated letters. Is the Num Lock LED on? If so, the numeric keypad on the keyboard is active. To return the keypad keys to typing letters, press . Battery power seems to run out faster than expected. If you are running the computer from the battery rather than the power cord, make sure that you set the Idle Mode fieldinSystem Setup to On. This setting enables the microprocessor and the hard drive to slow down when the computer is not busy. Certain software programs “hang” during operations when there is no interaction with the keyboard or peripheral devices. Your computer may be in Suspend or Rest mode. Tap the touchpad to resume from Suspend or press the power button to resume from rest. A PC Card does not work correctly. Make sure that the PC Card is inserted left side up in the PC Card slot. Check that the card is inserted fully into the slot. If you are using a PC Card mod...
Ce manuel est également adapté pour les modèles :Ordinateurs portables - N760 (3.4 mb)
Ordinateurs portables - N760-P702B/XSJ (3.4 mb)
Ordinateurs portables - N760FN2110/SHK (3.4 mb)
Ordinateurs portables - N760FR2000/SUK (3.4 mb)