Log:
Évaluations - 4, GPA: 3.8 ( )

Instructions Toshiba, Modèle Satellite 1805-S204

Fabricant : Toshiba
Taille : 4.2 mb
Nom Fichier :
Langue d'enseignement:
Aller à la télécharger



Facilité d'utilisation


If you have not yet used the computer, skip to step 3. 1 If the computer is on, click Start, then click Turn Off Computer. 2 In the Turn Off Computer dialog box, select Turn Off. The computer turns itself off. 3 Remove any cables connected to the computer. 4 Close the display panel and turn the computer upside down. 5 Using a small Standard #1 Phillips screwdriver, remove the screw that secures the memory slot cover, then remove the cover. Getting Started Setting up your computer 49 CAUTION: To avoid damaging the computer’s screws, use a small Standard #1 Phillips screwdriver that is in good condition. Removing the memory slot cover CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touching the connectors on the memory module or onthe computer. Oil or dust on the connectors can cause memory access problems. 6 Remove the memory module from its antistatic packaging, holding it by its edges. 7 Gently slide the module into the socket. 50 50 Getting Started Setting up your computer Inserting the memory module 8 Push the module down until the latches on either side of the socket engage, securing the module in the socket. 9 Position the memory module cover on the computer and secure it with the screw. 10 Turn your computer right side up. 11 Reconnect any cables you disconnected. 12 Turn on the computer. 13 Click Start, then click Control Panel to open the Control Panel. 14 Double-click the System icon to open the System Properties dialog box. 15 Verify that the amount of RAM listed matches the amount of memory currently installed. Removing a memory module 1 Perform steps 1 through 5 in “Installing a memory module” on page 48, to access the computer’s memory socket. 2 Release the memory module by gently pressing outward on the latches on either side of the memory socket. One edge of the module pops up. Getting Started Setting up your computer 51 Removing the memory module 3 Remove the memory module from the computer and store it in antistatic packaging. CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touching the connectors on the memory module or on the computer. Oil or dust on the connectors can cause memory access problems. 4 Position the memory module cover on the computer and secure it with the screw. 5 Turn the computer right side up. 6 Reconnect any cables you removed. 52 52 Getting Started Setting up your computer Connecting a mouse You may want to use a mouse or trackball instead of the computer’s built-in TouchPad. Your notebook computer supports USB and PS/2-compatible pointing devices. The TouchPad® can remain operable, even if you connect a secondary pointing device to the computer. For more info...

Ce manuel est également adapté pour les modèles :
Récepteurs Satellite - 1805 (4.2 mb)
Ordinateurs portables - Satellite 1800-S204 (4.2 mb)
Ordinateurs portables - Satellite 1800-S206 (4.2 mb)
Ordinateurs portables - Satellite 1800-S207 (4.2 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories