Évaluations - 3, GPA: 3 ( )

Fabricant : Toshiba Taille : 4.2 mb Nom Fichier : Langue d'enseignement:

Using a USB mouse 1 Connect the mouse cable to the USB port. 2 Install the vendor supplied software that came with the mouse, if needed. Using a PS/2 mouse The system cannot detect a PS/2 mouse if you connect it after starting the computer. NOTE: If you connect a PS/2 mouse to the computer while it is in Standby mode, you will not be able to use the mouse when you turn the computer on. CAUTION: When connecting any PS/2 device, turn off your computer to prevent any possible hardware damage. 1 Attach the PS/2 mouse cable to the PS/2 port. 2 Refer to your mouse documentation for configuration steps. Getting Started Setting up your computer 53 Connecting a keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s PS/2 port supports any PS/2-compatible keyboard. NOTE: If you connect a PS/2 keyboard to the computer while it is in Standby mode, you will not be able to use the keyboard when you turn the computer on. CAUTION: When connecting any PS/2 device, turn off your computer to prevent any possible hardware damage. Connecting a printer CAUTION: Connecting the printer cable while the computeris on may damage the printer, the computer, or both. Before connecting a printer, you need to know whether it requires a serial or a parallel interface. Check the printer’s documentation. If the printer can be switched between serial and parallel mode, choose parallel because it is faster. You also need a suitable printer cable — which may come with your printer. If not, you can purchase one from a computer or electronics store. NOTE: If your printer is ECP- or IEEE-compliant, make sure your printer cable is an IEEE 1284 cable. 54 54 Getting Started Setting up your computer The following instructions assume you have a parallel printer, which is the most common type. 1 Connect the printer cable to the printer and to the computer’s parallel port. To the computer To the printer Identifying the ends of a parallel printer cable 2 Plug the printer’s power cable into a live AC outlet. Refer to your printer documentation for additional configuration steps. Connecting the AC adapter The AC adapter enables you to power the computer from an AC outlet and to charge the computer’s batteries. A status light on the AC adapter glows when the device is in use. AC adapter and power cable Getting Started Setting up your computer 55 To connect AC power to the computer: 1 Connect the power cable to the AC adapter. 2 Plug the AC adapter into the computer’s DC-IN jack. Connecting the adapter to the computer 3 Connect the power cable to a live AC outlet. If the battery is being charged, the battery light on the status panel glows amber. Once the battery is fully charged the battery light remains on and glows green. DANGER: To avoid electric shock, never modify, forcibly bend, damage, place heavy objects on top of, or apply heat to the power cable. If the power cable becomes damaged or the pl...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :