Évaluations - 3, GPA: 3.7 ( )

Fabricant : Toshiba Taille : 3.26 mb Nom Fichier : Langue d'enseignement:

If the two passwords match, System Setup displays: Registered. If the two passwords do not match, an error message appears. Repeat steps 6 and 7 to enter the password again. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, Press Y. Keeping Your Files Safe 208 Using passwords in the Windows ® operating system Deleting or changing a hard disk drive user only password in System Setup To delete or change a user only password in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power switch until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Press the spacebar, then type in your user password and press Enter. 5 If you want to change the password, input the new password. 6 When System Setup prompts you to verify the password, type it again and press Enter. If the two passwords match, System Setup displays: Registered. If the two passwords do not match, an error message appears. Repeat steps 5 and 6 to enter the password again. 7 If you want to delete the user password, leave the space blank and press Enter twice. System Setup displays: Not Registered. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, Press Y. Keeping Your Files Safe 209 Using passwords in the Windows ® operating system Setting a hard disk drive master and user password in System Setup Make sure you choose a hard disk drive master password you can remember easily. If you set a hard disk drive user password and later forget the password or lose your password diskette, you will need to enter the hard disk drive master password in order to access your hard disk. To register master and user passwords in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power switch until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Press the spacebar to select Master + User password mode. 5 Press the down arrow key to move to the Master Password section. You must register a Master Password first. 6 Press the spacebar, then type a password of 1 to 16 characters and press Enter. You may use any combination of letters and numbers in your password. Keeping Your Files Safe 210 Using passwords in the Windows ® operating system 7 When System Setup prompts you to verify the password, type it again and press Enter. If the two passwords match, System Setup displays: Registered for both User and Master passwords. If the two passwords do not match, an error message appears. Repeat steps 6 and 7 to enter the password again. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, Press Y. Changing the master and user passwords in System Setup To change the master and user passwords in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power switch until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Use the up and down arrow keys to select the password you wish to change. 5 Press the spacebar, then enter the appropriate password and press Enter. Keeping Your Files Safe 211 Using passwords in the Windows ® operating system 6 If you want to change your password, input the new password. 7 When System Setup prompts you to verify the password, type it again and press Enter. If the two passwords match, System Setup displays: Registered. Note that you can only change (not delete) the user password if a master password is registered. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, Press Y. Deleting the hard disk drive master and user passwords in the System Setup HINT: You must delete the hard disk drive master password before you can delete the hard disk drive user password. To delete the master and user passwords in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power switch until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press F1. The System Se...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :