Évaluations - 3, GPA: 3.7
(
)
)
|
Par ce dispositif a également d'autres instructions :
Ordinateurs portables - VPCSA2Z9E_BI (471.57 kb)
Facilité d'utilisation
Then, double-click setup.exe in the C:\Infineon folder to install the package. To install this package, you must have administrative rights on the computer. ! You need to set a few passwords while installing the Infineon TPM Professional Package. Without these passwords, you will not be able to restore any TPM-protected data or backup files. Be sure to write down the passwords and keep them safe and private from other people. To initialize and configure the TPM See the on-screen documentation for detailed information. To open the documentation, click Start, All Programs, Infineon Security Platform Solution, and Help. ! The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liability for any defects arising out of your data maintenance and management. Using Your VAIO Computer > Using the TPM n 97 N Using BitLocker Drive Encryption with the TPM BitLocker Drive Encryption is a data encryption feature that is available on models with Windows 7 Ultimate or Windows 7 Enterprise. Enabling BitLocker Drive Encryption in conjunction with the TPM encrypts all data on the built-in storage device. For detailed information on how to use and configure BitLocker Drive Encryption, see Windows Help and Support. See the specifications to find out about the configuration of your computer. Notes on using BitLocker Drive Encryption . Be sure to initialize the TPM with the Infineon TPM Professional Package before enabling BitLocker Drive Encryption. If you enable it without initializing the TPM, a TPM owner password is not generated, so you will not be able to configure the Infineon TPM Professional Package. . The Infineon TPM Professional Package does not make a backup copy of a file (recovery password) for BitLocker Drive Encryption. . An additional BitLocker system partition has been pre-configured. This system partition uses 100 MB of your total built- in storage device volume. . You must enable the TPM in the BIOS setup screen in order to turn on BitLocker Drive Encryption. . Do not encrypt data on a storage device (such as a USB flash memory device) on which a recovery key is stored using BitLocker Drive Encryption. Using Your VAIO Computer > Using the TPM n 98 N To unlock the encrypted data with a recovery key stored on a USB flash memory device To unlock the encrypted data with a recovery key stored on a USB flash memory device, your system needs to access the USB flash memory device when you boot the computer. Follow these steps to configure the boot order in the BIOS setup screen: ! You cannot use USB devices if you disable the USB ports in the BIOS setup screen. To enable the ports, follow the steps in Protecting Data from Unauthorized Use (page 131). 1 Connect a USB flash memory device. 2 Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears. The BIOS setup screen appears. If the screen does not appear, restart the computer and try again. 3 Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key. 4 Press the M or m key to select Enable and then the Enter key. 5 Press the < or , key to select Boot and then select Enabled for External Device Boot. 6 Press the M or m key to select Boot Priority and then the Enter key. 7 Press the F5 or F6 key to change the boot device order so that Internal Hard Disk is listed higher than External Device. ! You need to move Internal Optical Drive to the top of the list to recover the computer system using your Recovery Media. 8 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. 9 After your system restarts, select Execute in the confirmation window and then press the Enter key. 10 Follow the instructions in Windows Help and Support to enable BitLocker Drive Encryption. 11 Save the recovery password to the USB flash memory device in the window for saving the recovery password. 12 Follow the on-screen instructions. The encryption process will start. Using Your VAIO Computer > Using the TPM n 99 N ! Updating your BIOS with updating software, such as the VAIO Update, changes the BIOS settings back to the default. You need to repeat the steps above again. It takes several hours to complete the encryption process. Using Peripheral Devices > Using Peripheral Devices > 0 N Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. . Connecting a Port Replicator (page 101) . Connecting External Speakers or Headphones (page 108) . Connecting an External Display (page 109) . Selecting Display Modes (page 115) . Using the Multiple Monitors Function (page 116) . Connecting a USB Device (page 118) Using Peripheral Devices > Connecting a Port Replicator n101 N Connecting a Port Replicator Attaching an optional port replicator enables you to connect additional peripherals to your computer, such as a printer and an external display. Locating Ports on the Port Replicator A DC...
Ce manuel est également adapté pour les modèles :Ordinateurs portables - VPCSA1A7E (3.05 mb)
Ordinateurs portables - VPCSA1B7E (3.05 mb)
Ordinateurs portables - VPCSA2C5E (3.05 mb)
Ordinateurs portables - VPCSA2S9R_BI (3.05 mb)