Évaluations - 0, GPA: 5
(
)
)
|
Facilité d'utilisation
• Always remove the voltage converter from the cigarette lighter socket when the set is not in use. Note: If your car radio has a LINE IN socket , it is better to use it for the car radio connection instead of the cassette adapter. Connect the signal lead to this LINE IN socket and to LINE OUT/p on the set. 4,5 V DC 12 V DC CD PLAY / FEATURES • If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly, nF dISC is displayed, indicating that the CD has not been finalized. In that case, use FINALIZE on your CD recorder to complete the recording. • When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds after pressing 2; for sound reproduction to start. • Playback will stop and the set will turn off if you open the CD lid. • While the CD is read, 01 --:-- flashes in the display. Volume and bass Volume adjustment • Adjust the volume by using VOL E. Bass adjustment • Press DBB to switch the bass enhancement on or off yDBB appears if the bass enhancement is activated. This CD-player can play all kinds of Audio Discs such as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD. 1 Push the OPEN 2 slider to open the player. 2 Insert an audio CD, printed side up, by pressing the CD onto the hub. 3 Close the player by pressing the lid down. 4 Press 2; to switch the player on and start playback. yThe current track number and elapsed playing time are displayed. • You can pause playback by pressing 2;. yThe time at which playback was paused starts flashing. • You can continue playback by pressing 2; again. 5 Press 9 to stop playback. yThe total number of tracks and the total playing time of the CD are displayed. 6 Press 9 again to switch the player off. • To remove the CD, hold it by its edge and press the hub gently while lifting the CD. Note: If there is no activity, the set will automatically switch off after a while to save energy. OPEN 0 Selecting a track during playback • Briefly press . or§once or several times to skip to the current, previous or next track. yPlayback continues with the selected track, and the track’s number is displayed. Selecting a track when playback is stopped 1 Briefly press . or §once or several times to select the desired track. The track number is displayed. 2 Press 2; to start CD play. yPlayback starts with the selected track. Searching for a passage during playback 1 Keep . or §pressed to find a particular passage in a backward or forward direction. ySearching starts while playback continues at low volume. After 2 seconds the search speeds up. 2 Release the button when you reach the desired passage. yPlayback continues from this position. Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible. – In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or while playing a program, searching is only possible within the particular track. In-car use (connections supplied or optionally available) Playback information Playing a CD Selecting a track and searching FEATURES You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program. 1 While playback is stopped, select a track with .or§. 2 Press PROG to store the track. yPROG lights up; the track number programmed and P with the total number of stored tracks are displayed. 3 Select and store all desired tracks in this way. 4 Press 2; to start playback of your selected tracks. yPROG is shown and playback starts. • You can review the program by pressing PROG for more than 2 seconds. yThe display shows all the stored tracks in sequence. Notes: – If you press PROG and there is no track selected, noProg is displayed. – If you try to store more than 30 tracks, FULL is displayed. Clearing the program • While playback is stopped, press 9 to clear program. yCLEAr is displayed once, PROG goes off, and the program is cleared. Note: The program will also be cleared if the power supply is interrupted, or if the CD-player lid is opened, or if the set switches off automatically. Programming track numbers FEATURES / TROUBLESHOOTING You can interrupt playback and continue (after up to 1 minute in the disc stop position only) from the position where playback stopped (RESUME) You can lock all buttons of the set so that no action will be executed (HOLD). Use the RESUME–HOLD–OFF slider for these functions. RESUME – continuing from where you have stopped 1 Switch the slider to RESUME during playback to activate RESUME. yRESUME is shown. 2 Press 9 whenever you want to stop playback. 3 Press 2; whenever you want to resume playback. yRESUME is shown and playback continues from where you have stopped. • To deactivate RESUME, switch the slider to OFF. yRESUME goes off. HOLD – locking all buttons You can lock the buttons of the set by switching the slider to HOLD. Now, when a key is pressed, no action will be executed. This is of use, for example, when transporting the player in a bag. With HOLD activated, y...
Ce manuel est également adapté pour les modèles :Lecteurs - AX 2330/00 (1.26 mb)
Lecteurs - AX2330/00 (1.26 mb)