Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
PLAY BUTTON 29. RECORD BUTTON 3 POWER SOURCE This AM/FM STEREO CD Cassette Recorder operates on 8 x ‘LR14’ (‘C’) batteries (not included) or from AC 120V~ 60Hz line power supply. A. BATTERY OPERATION 1. Remove the Battery Door. 2. Following the polarity diagram as shown in the battery compartment insert 8 x ‘LR14’ (‘C') batteries then replace the Battery Door. IMPORTANT : Be sure that the batteries are installed correctly. Wrong polarity may damage the unit. 3. Use only the size and type of batteries specified. 4. For better performance and longer operating time, we recommend the use of alkaline-type batteries. 5. Do not mix old and new batteries. 6. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. 7. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty. 8. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions). 9. Do not dispose of batteries in fire, batteries may leak or explode. B. AC OPERATION When the AC power cord (included) is connected to the AC INPUT Socket (# 17) at the back of the unit and the other end to a wall outlet with AC 120V ~ 60Hz power supply, the unit will disconnect the batteries automatically, and operate from AC power instead. Note: plug is used as the disconnect device. The disconnect device shall remain readily operable. IMPORTANT : This unit has a polarized AC plug with one wide blade and one narrow blade. This plug will only fit into a matching polarized AC outlet. This is a safety feature to reduce the possibility of electric shock. If this plug will not fit in your AC outlet, you probably have an outdated non-polarized outlet. You should have your out-dated outlet changed by a qualified, licensed electrician. Do not file the wide blade on the plug, or use an adaptor to make the plug fit onto your outlet. This defeats the safety feature and could expose you to electric shock. AC Outlet AC Plug 4 CD PLAYER OPERATION Note: This player not only plays commercial CDs but also plays self-compiled CD-R/RW discs. 1. Set the Function/ Power Switch (# 19) to "CD" position. The player will display “- -”. 2. Open the CD LID by pressing the CD OPEN Button (# 3). Carefully place an audio CD, with its label side upward, in the CD compartment and close the CD Door. 3. The total number of tracks on the CD will appear in the LCD Display (# 14) after a few seconds. 4. Press the CD PLAY/PAUSE Button (# 5). The CD PLAY Indicator “PLAY ” will light and the CD will start playing from the first track. 5. Adjust the Volume Control (# 20) to obtain the desired sound level from the Built-in Speakers. 6. To suspend playing, press the CD PLAY/PAUSE Button (# 5). The CD PLAY Indicator “PLAY ” will flash. To resume playing, press the CD PLAY/PAUSE Button (# 5) again. 7. You can choose to play your favorite track directly by pressing either the CD Skip Forward Button (#10) or CD Skip Backward Button (#7). The LCD Display (#14) will indicate the correct track number selected. 8. To locate a particular passage within a track, keep the CD Search Forward Button (#10) or CD Search Back ward Button (#7) depressed until it is found. 9. To repeat a particular track, press the CD REPEAT Button (# 11) once or until the CD REPEAT Indicator “REPEAT” (# 8) lights. 10. To repeat the entire CD, press the CD REPEAT Button (# 11) twice or until the CD REPEAT Indicator “REPEAT ALL” (# 8,15) lights. 11. To stop playing, press the CD STOP Button (# 12). 12. When you wish to turn off the CD PLAYER, set the Function/Power Switch (# 19) to "TAPE". CD PROGRAMMED PLAY This function allows the tracks to be played in a programmed sequence. 1. In CD stop mode, press the PROGRAM Button (#16) once. The CD PROGRAM Indicator “PROGRAM” (# 13) will flash and “00” will appear and blink in the LCD Display (# 14) to prompt for input. 2. Press the CD Skip BACKWARD Button (#7) or CD Skip FORWARD Button (#10) to select the song to be programmed. For example track 8 is selected. 3. Press the PROGRAM Button (# 16) again to store the selection. The Program Channel No. will change to “00” and blink to prompt for Input. 4. Press the CD Skip Forward Button (#10) or CD Skip Backward Button (#7) to select the next song to be programmed and press the PROGRAM Button (#16) to store the selection. For example second selection is track 15. 5. You may repeat steps 2 - 4 to program as many as 20 tracks. The LCD Display (#14) will display “- -” after programming 20 tracks. 6. Press the CD PLAY/PAUSE Button (# 5) to start playing in the programmed sequence. The PLAY lndicator "PLAY " appears with the PROGRAM lndicator, "PROGRAM", flashing in the Display. 7. Adjust the Volume Control (# 20) to obtain the desired sound level from the Built-in Speakers. 8. To resume to normal playback, in CD Stop mode press the PLAY/PAUSE Button (#5) again....
Ce manuel est également adapté pour les modèles :Lecteurs - Hello Kitty KT2028A (1.35 mb)