Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
TIP Using the PAUSE button on the cassette deck instead of the STOP/EJECT button to momentarily interrupt recording gives you a much cleaner sound recording. U USING THE CD PUSH PLAY/PAUSE STOP HBS HBS REPEAT RANDOM PROGRAM CD PLAY MODE REMOTE SENSOR LOADING A CD 1. Move FUNCTION to CD; “– –” flashes, then “no” appears in the display if no CD is loaded. 2. Press ) PUSH to open the CD door. 3. Place a CD into the tray with the label facing up. 4. Close the CD door. Then the total number of tracks appears. 5. To remove the CD, press ) PUSH, grasp the CD by its edges, and carefully pull it out. PLAYING A CD Press PLAY/PAUSE to play all the tracks in order starting with track 1. The current track number appears in the display. Note: Press PLAY/PAUSE to temporarily stop the CD. The indicator and the track number flash in the display. Press PLAY/PAUSE again to resume playing the CD. • Adjust VOLUME to a comfortable level. • Press STOP 7 to stop playing the CD. Wait a few seconds for the CD to stop turning, then press ) PUSH to open the CD compartment door and remove the CD. AUTOMATIC SEARCH Automatic search lets you quickly locate the beginning of any track on the CD, including the track currently playing. If the CD is playing: • Press (skip/search) once to return to the beginning of the current track, press twice to return to the beginning of the previous track. • Press (skip/search) to skip to the beginning of the next track. If the CD is stopped, repeatedly press (skip/search) or (skip/search) until the display shows the number of the track you want to play, then press PLAY/PAUSE . The CD player starts playing the selected track. TRACK SEARCH • In play mode, press and hold (skip/search) to move forward through a track at high speed. • In play mode, press and hold (skip/search) to move backward through a track at high speed. REPEAT The REPEAT button allows you to repeat one track (REP 1) or all tracks (REP ALL). To scroll through the choices, continuously press and release REPEAT and check the display to see which choice you have selected. The following chart illustrates how REPEAT works in various modes. NORMAL REP 1 REP ALL • You cannot select the “REP 1” mode for the random play. RANDOM Press RANDOM so that “RAND” appears in the display. Start play by pressing PLAY/PAUSE , and the tracks are played in random order. To quit random play, press RANDOM again. PROGRAMMING Press PROGRAM to enter program edit mode. “00” and “PROG” will flash in the display. Press (skip/search) or (skip/search) to select the track number and press PROGRAM to store the number in program place. You can repeat these steps to program up to 20 tracks. Note that programming more than 20 tracks will overwrite the tracks already programmed. During program play, “PROG” lights steadily. To confirm the program order, press PROGRAM in stop mode. Each time you press PROGRAM, the program number appears, then the corresponding track number flashes in order from the first programmed track. To clear the entire program in the memory, turn the unit off, or open the CD door. This unit has been designed only to play back the following CDs. • Digital audio CD • Recordable digital audio CD (CD-R) • Rewritable digital audio CD (CD-RW) When playing a CD-R or CD-RW You can play back finalized CD-R or CD-RW recorded in music CD format. (If a CD-RW has been recorded in a different format, erase all the data on the CD-RW completely before recording on it.) • You can play back CD-R or CD-RW like an audio CD. • Some CD-R or CD-RW may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player lens is dirty. • The reflection factor of CD-RW is lower than that of other CDs, possibly causing CD-RW to take longer time to read. • CD-R and CD-RW of MP3 format cannot be played back. VICTOR COMPANY OF JAPAN, LIMITED CD door ) PUSH REPEAT RANDOM skip/search backward PLAY/PAUSE Antenna BEAT CUT/FM MODE switch AC power jack Battery compartment STOP 7 PROGRAM BEAT CUT FM MODE 1 2 STEREO MONO skip/search forward FUNCTION Problem Solution • Make sure power cord is securely plugged into the AC power outlet (or that the batteries are fresh). • Unplug the unit for a moment, and then plug it back in again. • Check the outlet by plugging in another device. • Adjust volume setting. • Make sure you have selected the correct function: CD, TAPE, or TUNER and the headphones are disconnected. • Adjust the FM telescopic antenna for better FM reception. • Rotate the unit to achieve better AM reception. • Try turning off electrical appliances near the unit, such as TV, hair dryers, vacuum cleaners, or fluorrescent lights. • Make sure the tray contains a CD. • Make sure the CD’s label is facing up. • Make sure that pause mode is not activated. • Make sure CD function is selected. • Clean the CD (as explained in “CARE AND MAINTENANCE”). • Check CD for warping, scratches, or other damage. • Check for vibration or shock that may affect the un...
Ce manuel est également adapté pour les modèles :Lecteurs - RC-EX10A (357.07 kb)
Lecteurs - RC-EX10S (357.07 kb)