Wt Volts KW Amps Type Receptacle Req’d. EL1 10Уг,г 12” 3” 6 lbs. 120 1.1 9.2 15A-120V EL2 10V2” 20” 3” 8 lbs. 240 2.5 10.5 1 5A-240V 208 1.9 9.0 (NEMA 6-15) NOTE: A separate circuit should be supplied for each of these stoves with a matched circuit breaker or fuse. Check local codes for compliance in installation. WARNING: WARRANTY IS VOID IF STOVE IS CONNECTED TO ANY VOLTAGE OTHER THAN THAT SPECIFIED. INSTALL STOVE AT LEAST 1" FROM WALL. CLEANING INSTRUCTIONS Heating elements puil

DO NOT OPERATE STOVE UNLESS LEGS ARE INSTALLED Unpack unit and mount adjustable legs (packed separately in plastic bag.) Level unit by screwing legs up or down as necessary. For single phase units, plug line cord into receptacle specified above. For three phase units, remove rear cover plate to expose terminal block and grounding lug. Extend 4-wire conduit (flexible or rigid) to terminals through conduit hole on rear of unit and connect as shown on wiring diagram Replace rear cover plate Befor

A well cleaned stove will give you many years ol service. CECILWARE SELLS VALUE... 43-05 20th Avenue, Long Island City, New York 11105 • FAX: (718) 932-1414 (718) 932-7860 N587A HEAVY DUTY COMMERCIAL ELECTRIC SHORT ORDER STOVE EL24SH ELECTRICAL SPECIFICATIONS Volts KW *Amps 1 Phase Amps Per Line 3 Phase *Type Receptacle Req’d. 1 Phase Only LI L2 L3 JOB 3.9 18.7 16.3 9.4 9.4 30A-240V 240 5.2 21 7 18.7 10.8 10.8 (NEMA 6-30П) Dual voilage units - specify single phase or three phas