Évaluations - 3, GPA: 3.3 ( )

Fabricant : LG Taille : 2.32 mb Nom Fichier : Langue d'enseignement:

^ Turn the dishwasher off o. ^ Press the program button and at the same time turn the dishwasher on g. Hold the program button until the lower right program indicator comes on. If it does not come on, start over. ^ Press the program button briefly four times. The "Intake/Drain" indicator flashes 4 times in intervals. The upper right program indicator shows if the program end buzzer is turned on or off. – Upper right program indicator flashes: Buzzer is turned on – Upper right program indicator is off: Buzzer is turned off ^ To change the setting, press the program button until the "Intake/Drain" indicator lights. ^ Press the program button briefly three times. The setting is saved. ^ Turn the dishwasher off o. Additional functions Factory default All settings can be reset to the factory default. ^ Open the door. ^ Turn the dishwasher off o. ^ Press the program button and at the same time turn the dishwasher on g. Hold the program button until the lower right program indicator comes on. If it does not come on, start over. ^ Press the program button 12 times. The "Intake/Drain" indicator flashes once long and twice short in intervals. The upper right program indicator shows if a setting was changed. – The upper right program indicator flashes: All settings are the factory default. – The upper right program indicator is off: At least one setting was changed. ^ To change the setting, press the program button until the "Intake/Drain" indicator lights. ^ Press the program button briefly three times. The setting is saved. ^ Turn the dishwasher off o. Frequently asked questions With the aid of the following guide, minor problems can be fixed without a service call. ,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage. Technical faults Issue Possible fault Solution The program does not start. The door is not properly closed. Close the door firmly. The machine is not plugged in. Insert the plug. The fuse has tripped. Reset the circuit breaker. Make sure it is a 15 A breaker. The dishwasher is not turned on. Press g and select a program. The dishwasher stops during a program. The fuse has tripped. Reset the circuit breaker. Make sure it is a 15 A breaker. Frequently asked questions Issue Possible fault Solution The buzzer sounds. All program indicators flash when the door is open. There may be a technical fault. – Turn the dishwasher off o. After a few seconds: – Turn the dishwasher on. – Select the desired program with the program selector button. – Close the door. If the problem persists, call Technical Service. The drain pump is running when the door is open. The waterproof system has activated. – Turn off the water supply. – Call Miele Technical Service. Frequently asked questions Problems water intake/drain Issue Possible fault Solution Shortly after the program start the program stops. The buzzer sounds. The "Intake/Drain" indicator flashes and lights alternately when the door is open. The water supply is closed. – Open the water supply all the way. The dishwasher stops, the buzzer sounds and the Before fixing the fault: – Turn the dishwasher off o. Fault in the water – Open the water supply all the way. "Intake/Drain" indicator flashes when the door is open. intake. – Clean the water intake filter, see "User Maintenance Instructions". – The water pressure at the water connection is lower than 4.35 psi. Consult a plumber. Fault in the water – Clean the triple filter. drain. – Clean the drain pump and the There may be non-return valve. water in the wash See "User Maintenance Instructions" cabinet. for more info on the above. – Remove any kinks in the drain hose. Frequently asked questions General problems with the dishwasher Issue Possible fault Solution Detergent is left in the dispenser at the end of a program. The dispenser was damp when detergent was added. Dry the dispenser before adding detergent. The detergent lid cannot be closed properly. Detergent residue is blocking the catch. Remove the residue. The door and the interior walls are still wet after a program has finished. This is not a fault! It is the normal operating mode of the drying system. The moisture will evaporate after a short time. Water remains in the wash cabinet at the end of a program. Before fixing the fault: – Turn the dishwasher off o. The triple filter in the wash cabinet is clogged. Clean the triple filter. See "User Maintenance Instructions". The drain pump or the non-return valve may be blocked. Clean the drain pump and the non-return valve, see maintenance instructions. The drain hose is kinked. Remove any kinks from the drain hose. Frequently asked questions Sounds Issue Possible fault Solution There is a knocking noise in the wash cabinet. The spray arm is hitting an item in the basket. Interrupt the program, rearrange items blocking the spray arms. There is a rattling noise in the wash ca...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :