|
Facilité d'utilisation
Removal................................................................................................................. 13 2. Installation ............................................................................................................. 13 B. Sliding Doors...............................................................................................................13 1. Removal................................................................................................................. 13 2. Installation ............................................................................................................. 13 C. Probe (Optional Accessory)........................................................................................14 IV. Cleaning and Maintenance Instructions.......................................................................... 15 A. Cleaning Instructions .................................................................................................. 15 1. Cleaning Procedure...............................................................................................15 2. Sanitizing Procedure - Following Cleaning Procedure .......................................... 16 B. Maintenance................................................................................................................ 16 3 I. Specifications A. Dimensions 1. B-1150SS units: mm [in.] 4 2. B-1300SS units: mm [in.] 5 3. B-1500SS units: mm [in.] 6 4. B-1650SS units: mm [in.] 7 II. Installation Instructions A. Checks Before Installation IMPORTANT 1. This ice bin is designed and intended to be used in combination with a Hoshizaki Modular Icemaker. If used with another manufacturer's icemaker, care must be taken to properly support and secure the icemaker in accordance with the manufacturer's recommendations. 2. Remove shipping carton, tape(s) and packing to prevent damage to the ice bin. 3. Ensure all components and fasteners are securely in place. 1) Remove the packages containing the accessories. 2) Remove the protective plastic film from the side panels. If the ice bin has been exposed to sunlight or direct heat, it should be allowed to cool beforeremoving the protective film. B. Location WARNING This ice bin is not intended for outdoor use. Normal operating ambient temperature should be within +45°F to +100°F. Extended periods of operation at temperatures outside of these limitations may cause unsatisfactory results. For best operating results: • Ice bin should not be located next to ovens, grills or other high heat producing equipment. • Location should provide a firm and level foundation for the equipment. • Always avoid a site where dripping is not allowed. • Allow 6" clearance at rear and sides for ease of maintenance and/or service should they be required. • Ice bin should not be located in an area that receives direct sunlight. 8 C. Setup CAUTION It is especially important that the ice bin is leveled in both left-to-right and frontto- rear directions. If it is not level, the result could be the production of smaller or irregular shaped cubes or of overflow into the ice bin. See the "LOCATION" instructions on the icemaker. 1. Unpacking the Ice Bin and Attaching the Snout Assembly 1) Unpack the ice bin, and remove all shipping cartons, tape(s) and packing. Remove the two bolts holding the ice bin to the pallet. Attach four (4) adjustable legs [adjustable within max. 6-13/32" (188 mm) to min. 6" (152 mm)] to the bottom of the ice bin. Be careful not to damage the panels when installing the ice bin. 2) Position the ice bin in a selected permanent site. 3) Remove the snout assembly from the box. 4) Remove any packing from the sno...
Ce manuel est également adapté pour les modèles :Autres appareils de cuisine - B-1300SS (360.63 kb)
Autres appareils de cuisine - B-1500SS (360.63 kb)
Autres appareils de cuisine - B-1650SS (360.63 kb)