Évaluations - 1, GPA: 4 ( )

Fabricant : Vulcan-Hart Taille : 378.79 kb Nom Fichier : d622b85b-1ca2-4822-96a7-2cb2b071e436.pdf Langue d'enseignement:

State and local codes. 2. National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. In Canada: 1. Local codes. 2. Canadian Electrical Code, CSA C22.1 (latest edition). Copies may be obtained from The Canadian Standard Association, 178 Rexdale Blvd., Etobicoke, Ontario, Canada M9W 1R3. ELECTRICAL CONNECTIONS Electrical and grounding connections must comply with the applicable portions ofthe National Electrical code and/or other local electrical codes. The cord and plug supplied, is a suitable durable cord with molded plug and is provided with a proper strain relief. Appliances equipped with a flexible electric supply cord provided with a three-prong grounding plug. It is imperative that this plug be connected into a properly grounded three-prong receptacle. If the receptacle is not the proper grounding type, contact an electrician. Do Not remove the grounding prong from this plug. Refer to wiring diagrams in this manual. All cabinets are equipped with an 8 ft. (2.4 m) cord and NEMA 5-15 plug as standard equipment. The banquet cart series are factory wired for either 110/120 volt or 208/240 volt, single phase operation. • All 208/240 volt carts are equipped with an 8 ft. (2.4 m) cord and NEMA 6-15 plug. — 5 — V SERIES Electrical Connection Electrical and grounding connections must comply with the applicable portions of the National Electrical Code and/or other Local Electrical Codes. Disconnect electrical power to the machine and follow Lockout/ Tagout procedures before cleaning. MODEL VOLTAGE AMP PHASE HZ NEMA PLUG VBP5I, VBP7I, VBP13I, 110/120 10 1 60 5-15 VBP15I, VBS7, VBS15, 208/240 5.4 6-15 VHDP5, VDW3 VBP77I 110/120 20 1 60 5-20 208/240 10.9 6-20 VHP3, VHP7, VHP8 110/120 5 1 60 5-15 208/240 2.7 6-15 VHP15, VHP20 110/120 10 1 60 5-15 208/240 5.4 6-15 VB90, VB96, 110/120 16.6 1 60 5-20 VB150, VB200 208/240 9.0 6-20 — 6 — V SERIES OPERATION The cabinet and its parts are hot, be very careful when operating, cleaning or servicing the cabinet. CONTROLS 1 POWER/HEAT 2 OFF 3 4 5 6 7 8 9 10 NSF® °F206080100120140150160170180190200210220020405060708090100105°CPOWER INDICATOR LIGHT HEAT INDICATOR LIGHT FULL RANGE THERMOSTAT THERMOMETER Fig. 4 HOLDING COMPARTMENTS POWER INDICATOR LIGHT Lit when power is supplied to cabinet. HEAT INDICATOR LIGHT Lit when heat is supplied to cabinet. FULL RANGE THERMOSTAT Turn to desired temperature setting (1-10). THERMOMETER Indicates interior temperature. BEFORE FIRST USE Disconnect electrical power to the machine and follow Lockout/ Tagout procedures before cleaning. Fig. 5 1. Clean appliance thoroughly. a. Use mild soap and water solution to clean appliance. b. Wipe dry with a soft clean cloth. c. Clean all accessories. 2. Operate appliance in highest temperature setting for a period of 30-45 minutes. (See Operating Instructions). — 7 — V SERIES OPERATING APPLIANCE 1. Connect electric power supply. • Power indicat...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :