Log:
Évaluations - 4, GPA: 4.5 ( )

Instructions Cooper Lighting, Modèle CMSRU180W

Fabricant : Cooper Lighting
Taille : 168.89 kb
Nom Fichier : 4bc716cd-6193-46c4-964e-c0633ba1a8a0.pdf
Langue d'enseignement: enesfr
Aller à la télécharger



Facilité d'utilisation


• Be sure the wall switch is in the ON position. • Be sure that the bulbs are not burned out or broken. Is the surrounding external ambient light too bright? (If so the unit may think it’s daytime.) • Re-aim the head. • Relocate or reposition the unit away from the light. Is the cord plugged onto the sensor head? • Be sure the adapter cord is correctly plugged into the slot on the bottom of the motion sensor mounting plate. TURN OFF POWER BEFORE CONTINUING. Is the wiring to the fixture loose? • Check wiring, and reconnect if necessary using wire nuts provided. Is there motion in the detection zone? • Make sure the sensor is not picking up moving objects such as trees, traffic, etc. TEST FOR YOURSELF • Cover the sensor lens with cardboard to prevent sensor from detecting motion. If the lights stay off, something in the detection zone is triggering the sensor. • If this is the case, reduce the sensitivity. • Reposition motion sensor. *If the lights stay on with sensor lens covered, contact customer service. Is there motion in the detection zone? • Make sure the sensor is not picking up moving objects such as trees, traffic, etc. • If this is the case, reduce the sensitivity. • Reposition motion sensor. If there is no motion, then the unit may be in the override mode. •Turn the light switch to the OFF position for 90 seconds, and then back to the ON position. This will send the unit back into the AUTO mode. *If the lights continue to stay on, contact customer service. OUTDOOR LIGHTS COME ON FOR NO APPARENT REASON AT NIGHT LIGHTS STAY ON AT NIGHT AND DO NOT TURN OFF (continued) 6 The light given off from the unit’s own lamps are affecting the motion sensor. • Re-aim lamps. • Reposition motion sensor. Is the switch on the bottom of the motion sensor in the TEST mode? • Move the switch to the AUTO 4 or 12 position. Is the motion detector shadowed? • Reposition motion sensor. Are you allowing adequate time to enter the override mode? •Turn power on and off twice within 3 seconds. Is there more than one fixture on an indoor wall switch? • If so, put them on separate switches. LIGHTS CONTINUOUSLY BLINK ON AND OFF AT NIGHT LIGHTS ARE ON DURING THE DAY CANNOT ACTIVATE MANUAL OVERRIDE 6 The light given off from the unit’s own lamps are affecting the motion sensor. • Re-aim lamps. • Reposition motion sensor. Is the switch on the bottom of the motion sensor in the TEST mode? • Move the switch to the AUTO 4 or 12 position. Is the motion detector shadowed? • Reposition motion sensor. Are you allowing adequate time to enter the override mode? •Turn power on and off twice within 3 seconds. Is there more than one fixture on an indoor wall switch? • If so, put them on separate switches. LIGHTS CONTINUOUSLY BLINK ON AND OFF AT NIGHT LIGHTS ARE ON DURING THE DAY CANNOT ACTIVATE MANUAL OVERRIDE Two year limited warranty Cooper Lighting (“the Company”) warrants this product (“the product”) against defects in material or workmanship for a period of two years from date of original purchase, and agrees to repair or, at the Company’s option, replace a defective product without charge for either replacement parts or labor during such time. This does not include labor to remove or install fixtures. This warranty is extended only to the original purchaser of the product. A purchaser’s receipt or other proof of date of original purchase acceptable to the Company is required before warranty performance shall be rendered. This warranty only covers product failure due to defects in materials or workmanship which occurs in normal use. It does not cover the bulb or failure of the product caused by accident, misuse, abuse, lack of reasonable care, alteration, faulty installation, subjecting the product to any but the specified electrical service or any other failure not resulting from defects in materials or workmanship. Damage to the product caused by separately purchased, non-Company brand replacement bulbs and corrosion or discoloration of brass components are not covered by this warranty. There are no express warranties except as described above. THE COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL IMPLIED WARRANTIES, IF ANY, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. No other warranty, written or verbal, is authorized by the Company. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. To obtain warranty service, please write to Cooper Lighting, 1121 Highway 74 South, Peachtree City, GA 30269. Enclose product model number and problems you are experiencing...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories