( kg.) 7 lb. (3 kg.) 75 lb. (3 kg.) 10 lb. ( kg.) lb. ( kg.) lb. ( kg.) 15 lb. ( kg.) 5 lb. ( 3 kg.) 1 lb. ( 7 kg.) 101 lb. ( 5 kg.) 137 lb. ( kg.) 130 lb. (5 kg.) 130 lb. (5 kg.) lb. (37 kg)/ (117 kg/sq.m) 5 lb./sq.ft. 0 lb. (313 kg)/ ( 0 kg/sq.m) 53 lb./sq.ft. 00 lb. (3 3 kg)/ ( 0 kg/sq.m) 53 lb./sq.ft. 1031 lb. ( 7 kg)/ ( 0 kg/sq.m) 57 lb./sq.ft. 75 lb. (30 kg)/ ( kg/sq.m) 5 lb./sq.ft. 5 0 lb. ( 3 kg)/ (175 kg/sq.m) 3 lb./pies cuadrados 3 lb. ( 1 kg)/ ( 11 kg/sq.m) 3 lb./sq.ft. 5 lb. ( kg)/ (

ROUGHING-IN REFERENCESSAVONA (MODEL 2901L)CORNER (MODEL 6060L / V) 7" (178mm) 76-3/4" (1949mm) 54-1/2" (1384mm) 65-3/8" (1661mm) 3" (76mm) 7" (178mm) 15" (381mm) 5-5/8" (143mm) 17-3/4" (451mm) 10" (254mm) 13-3/4" (349mm)CUT OUT IN FLOOR FOR DRAIN72" (1829mm) 44" (1118mm) 3" (76mm) 12" (305mm) 8" (203mm) RECOMMENDED FITTING LOCATION 64 X 279mm (2-1/2 X 11) . 6" (152mm) 11-1/2" (292mm) 5-1/2" (140mm) CADET CORNER (MODEL 2775L) 1524mm(60") 70mm REF. (2-3/4) 165mm(6-1/2) 279mm(11") 229 X 305mm(9" X

Framing and enclosing materials are provided by others. For electrical requirements, refer to section titled “Whirlpool Electrical Installation Instructions”. Check for availability of optional American Standard wall tiling bead (required for recess installation). Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth. DescriptionModel NumberLIST OF OPTIONAL COMPONENTS (NOT INCLUDED): • For these components please see your Vendor. * These models re

Fig. 2Fig. 3Fig. 1WARNING: Prior to operation, review the Important Safety Instructions listed at the beginning of this instruction manual. Once the heater is installed and the whirlpool pump is operating, the heater is totally automatic. The heater will help maintain the temperature of the water in the bath. Pressure SwitchThe heater is equipped with a preset pressure switch. The pump must be running with water flowing in the whirlpool to allow the heater to turn on. Indicator LightThis light t

A pressure wire connector is provided on the exterior of the motor unit to permit connection of a no. AWG solid copper bonding conductor between this unit and all other electrical equipment and exposed metal in the vicinity, as needed to comply with local requirements. To reduce the risk of an electric shock, connect this connector the grounding terminal of your electric service or supply panel with a conductor equivalent in size to the circuit conductors supplying this unit. IMPORTANT SAFETY IN

* These models require American Standard Lifetime™ Drain 1599.205 or 1599.500 753737-100 Rev. E 4 SPECIFICATIONS: L W H C SIDE VIEW END VIEW DRAIN / OVERFLOW ABJ GENERAL SPECIFICATIONS FOR LIFETIME / EVOLUTION WHIRLPOOLS AND BATH TUBS Description Dimensions L-W-H Drain / Overflow Height to Underside of Deck: C Cut Out Pier G x F Rough-In Recess E x D Tub Edge to Centerline Overflow: J Weight with Water / Floor Loading Product Weight Apron / Mounting Heater Ready for Field Installation Gallon to

Always follow local and national electrical codes 50' Wire Length 100' 115V Power Line 150' 200' 12 Wire Size (AWG) 10 8 8 753737-100 Rev. E 12 For 6060L/V Corner Only OPERATION WARNING: Prior to operation, review the Important Safety Instructions Fig. 1 listed at the beginning of this instruction manual. Once the heater is installed and the whirlpool pump is operating, the heater is totally automatic. The heater will help maintain the temperature of the water in the bath. Pressure Switch The he

(2-3/4) 165mm (6-1/2) 279mm (11") 229 X 305mm (9" X 12") CUTOUT IN FLOOR FOR DRAIN OUTLINE OF CUTOUT 2159mm (85") 1080 mm (42-1/2") C/L 1524mm (60") 1076mm (42-3/8") 1080mm (42-1/2") PUMP C/L OF DRAIN OUTLET PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS ELLISSE (MODEL 2711L) 1829mm (72") 927mm (36-1/2") OUTLINE OF CUTOUT 1791 X 1181 (70-1/2" X 46-1/2") C/L OF DRAIN 102mm (4") PUMP 305mm (12") 1219mm (48") 229mm x 356mm (9" x 14") FLOOR CUTOUT RECOMMENDED FITTING LOCATION 64 X 279mm (

(374 kg)/ 25 lb./sq.ft. (117 kg/sq.m) 108 lb. (49 kg.) N/A Included 86 gal. (325 l.) 71 gal. (269 l.) 2422L / V 5' x 32" L 1524mm (60") W 813mm (32") H 546mm (21-1/2") A 20-1/8" (511mm) B 11" (279mm) C 20" (508mm) 58-1/2" (1485mm) x 30-1/2" (774mm) 60-3/16" (1528mm) x 30-1/2" (774mm) 3-1/4" (83mm) 690 lb. (313 kg)/ 53 lb./sq.ft. (260 kg/sq.m) 74 lb. (34 kg.) Optional Optional 74 gal. (280 l.) 33 gal. (125 l.) 2771L / V 5' x 36" L 1524mm (60") W 914mm (36") H 546mm (21-1/2") A 20-1/8" (511mm) B 1

Towel or sponge remaining water from tank and bowl. b. Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply! c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases. d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area. NOTE: Mounting surface must be clean and level before new toilet is installed! INSTALL CLOSET BOLTS Install closet bolts in flange channel, turn 90°, and