Évaluations - 3, GPA: 3.3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
(Lasts for about 1 minute) c o c Refer to Action 1 below if the cooling fan inside the projector is not in normal operation condition. o c c Refer to Action 2 below if the lamp cover protecting the lamp unit is not closed properly. o o c Power is turned off automatically when temperature inside of the projector goes beyond the control limit. Refer to Action 3. • CJ CJ A problem has occurred when operating the IC in the product. Refer to Action 4. c c c A problem has occurred with the operation of the lamp. Refer to Action 5. • c • The lifetime of the lamp has expired. Refer to Action 6. c c o The memory in the product is not operating normally. Contact a Service Center. c c • The power for the product is not operating normally. Contact a Service Center. c • c A problem has occurred when operating the color wheel in the product. Refer to Action 4. Clearing Indicator Problems 3-4 Using CLASSIFICA TION STATE MEASURES Action 1 When the cooling fan system is not in normal operating condition. If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact a Samsung service center. Action 2 When the lamp cover protecting the lamp unit is not properly closed or the sensor system is not in normal operating condition. Check whether the screws at the bottom side of the projector are fastened correctly. If they are abnormally fastened, contact a Samsung service center. Action 3 When temperature inside of the projector becomes too high. Adjust the installation state of your projector by referring to the Installation Precautions section listed above. Cool down your projector sufficiently and then operate it again. If the same problem occurs continually, contact a Samsung service center. Action 4 No video Disconnect and reconnect the power cord and start the projector again. If the same symptom still occurs, contact a Samsung service center. Action б The lamp malfunctions after power turns off abnormally or after powering on right after turning off the projector. Turn the power off, wait for a sufficient amount of cooling time and then turn the power on to operate. If the same problem occurs continually, contact a Samsung service center. Action б When the screen becomes darker Check the lamp usage time on the Information Display screen. If you need to replace the lamp, contact a Samsung service center. ^ This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise, which does not affect the product performance and is part of normal operation. 3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure MENU SUB-MENU t u p □ Source List Edit Name S Picture Mode Size Position Digital NR Black Level Color Pattern Overscan 1080/24fps Mode Film Mode p u t e S □ Install Lamp Mode V-Keystone Background Test Pattern PC Color Standard Factory Default O Option Language Menu Position Menu Transparency Menu Display Time Auto Power On Sleep Timer LED Indicator Buzz Information Using 3-б H 3-5-1. Input MENU DESCRIPTION Source List You can select a device connected to the projector to display.
Projecteurs - SP-A600 (997.27 kb)