Évaluations - 2, GPA: 4 ( )

Fabricant : Toshiba Taille : 7.58 mb Nom Fichier : Langue d'enseignement:

• The first time you use the projector after purchase, after the start-up screen disappears, the start menu is displayed p.25 . • When [Key lock] is [On], the operation buttons of the projector do not work p.28 . • When [Password] is [On], the start-up screen is displayed after the Password entry screen disappears p.28 . ¦ Turning the power off 1Press the ON/STANDBY button. A message appears on the screen, confirming that you wish to shut off the power. This message will disappear after a moment. (This operation is no longer valid after the message disappears.) 2Press the ON/STANDBY button again. The screen turns off, but the internal cooling fan continues to operate for a short. Then , the projector goes into standby mode. When cooling lamp After cooling complete ABPOWERFLASH POWER AB During cooling ,the POWER indicator flashes.In this state,the power cannot be turned back on. If you are in a hurry, there is no problem with unplugging the power cord or turning off the main power switch in this state. In standby mode Note • The projector consumes about 15W of power in standby. We recommend that you unplug the power cord if you will not be using the projector for an extended period. PRECAUTION • If the power cord is unplugged before cooling is complete, give the lamp time (about 5 minutes) to cool before plugging it back in. 24 25 Operations Basic operations 1 Turn on the power. Turn on the power by following the instructions in “Turning the power on” p.23 . 2 Select the language (When using the first time). When the projector is used for the first time after purchase,the start menu for language(to display the menus and messages on screen) and confugration is displayed in English.(if the screen is out of focus,adjust it according to the step 6 .) . Use the or button to select the desired language and press the button. Message for setup confirmation is displayed in a selected language. Notes • When the projector is turned on the next time, the start menu does not appear upon startup. However, if [Reset all] is executed from the Default setting menu p.33 , the start menu will be displayed the next time when the power is turned on. • The language can slso be set via the Display setting menu p.32 . • This owner’s manual assumes that English has been selected. 3 Activate the connected device. Turn on and start the connected device such as a computer. 4 Press the INPUT button. An image of the connected eqipment is projected. Each time you press the INPUT button, it switches to the input of the connected equipment that is outputting video signals. Notes • When [Auto input search] is set to [On] in the Default setting menu p.33 (factory setting is [On]), the input is switched to the connected equipment that is outputting video signals each time you press the INPUT button p.41 . English German French Italian Spanish Portuguese Chinese (traditional) Chinese (simplified) Japanese Korean Russian Swedish Turkish Polish .. .. 26 5 Projector placement angle adjustments The placement angle and the height of the projected image can be adjusted by the foot adjuster. . Lift up the front of the projector to the desired angle, then press the foot adjuster release button. The foot adjuster extends. Release the button to lock the position. . To adjust the horizontal angle, use the tilt adjuster. To stow the foot adjuster, hold up the projector while pressing the foot adjuster release button, then slowly lower the projector. 6 Adjusting the screen size and focus . Use the zooming lever to adjust the screen size. . 2 Use the focusing ring to adjust the focus. Notes • Note that a lamp characteristics may rarely cause the brightness to fluctuate slightly. • A lamp is consumable item. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on conditions of use.) • The DMDTM is made using extremely advanced technology, but there may be black spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please note that these are not malfunctions. • Although this projector supports a wide range of RGB signals p.42 , any resolutions not supported by this projector (SVGA) will be expanded or shrunk, which will affect image quality slightly. To view high-quality images, it is recommended that the computer’s external output should be set to SVGA resolution. • With some models of computer having LCD displays or the like, displaying images simultaneously on the projector and the monitor’s display may prevent the images from displaying properly. If this happens, turn off the computer’s LCD display. For information on how to turn off the LCD display, see the owner’s manual of your computer. • If no signal is being input from the connected equipment or signal input is stopped while projecting, the “No signal” will appear. • If a signal not supported by the projector is input, the “Unsupport sign...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :