Log:
Évaluations - 6, GPA: 3.8 ( )

Instructions HP, Modèle LSG202M

Fabricant : HP
Taille : 1.17 mb
Nom Fichier :
Langue d'enseignement: enesfr
Aller à la télécharger



Facilité d'utilisation


• The installation must be in accordance with the National Electric Code, Uniform Plumbing Code, International Plumbing Code, as well as all applicable local codes and ordinances. • Sump and sewage pumps often handle materials which could cause illness or disease. Wear adequate protective clothing when working on a used pump or piping. • Never enter a pump basin after it has been used. Sewage and effluent can emit several gases which are poisonous. • Keep clear of suction and discharge openings. To prevent injury, never insert fingers into pump while it is plugged in. • DO NOT use this product for flammable or corrosive liquid. • DO NOT use this product in applications where human contact with the pumped fluid is common (such as swimming pools, fountains, etc.) • NEVER dispose of materials such as paint thinner or other chemicals down drains, as they can chemically attack and damage pump components, potentially causing product malfunction or failure. • Do not use these pumps in water over 140° F. • The Uniform Plumbing Code (UPC) states that sewage systems shall have an audio and visual alarm that signals a malfunction of the system, to reduce the potential for property damage. Model HP Volts Phase Full Load Amps FNPT Discharge Automatic or Manual* LSG202A 2 208/230 1 15 1.25” Automatic LSG202M 2 208/230 1 15 1.25” Manual LSG203M 2 208/230 3 10.6 1.25” Manual LSG204M 2 440/460 3 5.3 1.25” Manual LSGX202A 2 208-230 1 15 1.25” Automatic LSGX202M 2 208-230 1 15 1.25” Manual LSGX203M 2 208/230 3 10.6 1.25” Manual LSGX204M 2 440/460 3 5.3 1.25” Manual . Note: Manual models (“M” suffix), as designated above, require a separate approved pump control device or panel for automatic operation. Operation of these models will be according to the control selected. Make sure the electrical specifications of the control selected properly match the electrical specifications of the pump. Always refer to control panel instructions for proper installation. Introduction 2. 2-1 INTRODUCTION This manual was prepared to assist you in the correct installation, operation, and maintenance of your Liberty pump. Please read it completely before installing the pump. Make certain that you are familiar with the contents, and the chapters on installation and operation are fully understood before running the pump. Liberty Pumps are designed for minimal maintenance. However, regular checks will ensure longer life and greater operating reliability. WARRANTY: No repair work should be carried out during the warranty period without prior factory approval. To do so may render the warranty void. SERIAL #: In all correspondence and reports, make certain that the pump serial number is given. 2-2.1 DESIGN OF PUMP The grinder pump contains metal parts that rotate at high speeds. Be careful around pump base while power is connected. Make sure that the pump is either in the tank or clear from people and wires when in operation. 1. Liberty LSG and LSGX-Series grinder pumps are designed for con...

Ce manuel est également adapté pour les modèles :
Les machines à rectifier - LSG202A (1.17 mb)
Les machines à rectifier - LSG202A (1.17 mb)
Les machines à rectifier - LSG203M (1.17 mb)
Les machines à rectifier - LSG204M (1.17 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories