Évaluations - 4, GPA: 3.8 ( )

Fabricant : HP Taille : 1.17 mb Nom Fichier : b91ddac4-a8c5-4a14-b71e-ad32466ea8e5.pdf Langue d'enseignement:

Contents • General Information • Introduction • Mechanical Installation • Electrical Connection • Operation • Warranty Installation Manual 5647000F Omnivore Sewage and Grinder Pumps IMPORTANT: Prior to installation, record Model, Serial Number, and Code Number from pump nameplate for future reference. MODEL _____________________ SERIAL _____________________ CODE _____________________ INSTALLATION DATE _____________________ 7000 Apple Tree Avenue Bergen, NY 14416 Phone: (800) 543-2550 Fax: (585) 494-1839 Table of Contents SECTION 1 GENERAL INFORMATION------------------------------------------------------------------------------ 3 SECTION 2 INTRODUCTION-------------------------------------------------------------------------------------------- 4 SECTION 3 MECHANICAL INSTALLATION ----------------------------------------------------------------------- 4-6 SECTION 4 ELECTRICAL CONNECTION-------------------------------------------------------------------------- 6-8 SECTION 5 OPERATION ------------------------------------------------------------------------------------------------ 8 TROUBLESHOOTING CHART ------------------------------------------------------------------------ 9 PANEL INSTALLATION SHEET----------------------------------------------------------------------- 10 TYPICAL INSTALLATION DRAWING-----------------------------------------------------------------11 PERFORMANCE CURVE------------------------------------------------------------------------------- 12 SECTION 6 WARRANTY------------------------------------------------------------------------------------------------- 13 General Information 1. Before installation, read the following instructions carefully. Each Liberty pump is individually factory tested to insure proper performance. Closely following these instructions will eliminate potential operating problems, assuring years of trouble-free service. • Risk of electric shock. Always disconnect the pump from the power source before handling or making adjustments. • The electrical connections and wiring for a pump installation should only be made by qualified personnel. • This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle. • DO NOT bypass grounding wires or remove ground prong from attachment plugs. • DO NOT use an extension cord. • This pump requires a separate, properly fused and grounded branch circuit. Make sure the power source is properly sized for the voltage and amperage requirements of the pump, as noted on the nameplate. • The electrical outlet shall be within the length limitations of the pump power cord, and at least 4 feet above floor level to minimize possible hazards from flood conditions. • The installation must be in accordance with the National Electric Code, Uniform Plumbing Code, International Plumbing Code, as well as all applicable local cod...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :